Elektronische Bauelemente
S4FL5.0A~S4FL85A
5V ~ 85V
400W Peak Power Surface Mount TVS
RoHS Compliant Product
A suffix of “-C” specifies halogen-free and lead-free
FEATURES
Glass passivated chip
Low leakage
Uni polar unit
Excellent clamping capability
Very fast response time
RoHS compliant
400 W peak pulse power capability with a 10/1000 µs waveform,
repetitive rate (duty cycle):0.01 %
MECHANICAL DATA
Epoxy : UL94V-0 rate flame retardant
Case : SOD-123FL
Lead: Solderable per MIL-STD-750,method 2026
Polarity : Color band denotes cathode end
Mounting Position : Any
Weight : 0.0152 grams(approximate)
SOD-123FL
A
B
F
G
C
E
D
REF.
A
B
C
D
Millimeter
Min. Max.
2.4 3.10
1.55 2.00
0.80 1.55
3.3 3.90
REF.
E
F
G
Millimeter
Min. Max.
0.05 0.30
0.80 1.35
0.8 (Typ.)
PACKAGE INFORMATION
Package
MPQ
SOD-123FL
3K
Leader Size
7 inch
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, de-rate current by 20%.)
Rating
Symbol
Value
Peak power dissipation with a 10/1000µs waveform 1,3
Peak pulse current with a 10/1000µs waveform 1
PPP
400
IPP
See Next Table
Peak forward surge current, 8.3 ms single half sine-wave
unidirectional only 2
IFSM
30
Maximum instantaneous forward voltage at 25 A for unidirectional
only
VF
3.5
Operating junction and storage temperature range
TJ, TSTG
-55 ~ 150
Notes:
1.
2.
3.
Non-repetitive current pulse per Fig.3 and derated above TA= 25°C per Fig.1.
Measured on 8.3 ms single half sine-wave or equivalent square wave for unidirectional device only.
S4FL5.0A~S4FL9.0A Peak Pulse Power Dissipation is 370W min, 400W typical @10/1000µs
Unit
W
A
A
V
°C
http://www.SeCoSGmbH.com/
26-May-2017 Rev. A
Any changes of specification will not be informed individually.
Page 1 of 4
