SMBJ Series CR-C
600W Peak Power Surface Mount TVS
RoHS Compliant Product
A suffix of “-C” specifies halogen-free and lead-free
Qualified to AEC-Q101 standards for high reliability
Plastic package Underwriters Laboratory Flammability
For surface mount application
Glass passivated junction
Low incremental surge resistance, Excellent clamping capability
600W peak pulse power capability with a 10/1000us
waveform, repetition rate (duty cycle): 0.01%
Very fast response time
High temperature soldering guaranteed:
250°C / 10 seconds at terminals
Case: Molded plastic
Lead: Solder plated, solderable per MIL-STD-750,
Polarity: For unidirectional types the band denotes the
cathode, which is positive with respect to the anode under
normal TVS operation
SMBJ Series CR-C Lead (Pb)-free and Halogen-free
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Rating 25°C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.)
Minimum Peak Pulse Power Dissipation 1 2 @10/1000us waveform
Minimum Peak Pulse Current 1 @10/1000us waveform
Peak Forward Surge Current 2 @8.3ms single half sine-wave for
(See next table.)
Operating Junction and Storage Temperature Range
-55 ~ 150
Thermal Resistance Ratings
Thermal Resistance Junction-Ambient
Thermal Resistance Junction-Case
Non-repetitive current pulse, on Fig. 3 and derated above TA=25°C per Fig. 2.
Mounted on 0.2 x 0.2” (0.5 x 0.5 mm) copper pads to each terminal.
Mounted on minimum recommended pad layout.
26-Feb-2020 Rev. A
Any changes of specification will not be informed individually.
Page 1 of 4