S-93C86B Datasheet 3-WIRE SERIAL E2PROM

Manufacturer: Seiko Instruments

Overview: S-93C86B H Series www.sii-ic.com © Seiko Instruments Inc., 2009-2015 FOR AUTOMOTIVE 105°C OPERATION 3-WIRE SERIAL E2PROM Rev.2.1_00 The S-93C86B H Series is a high temperature operation 3-wire serial E2PROM for automotive components. The S-93C86B H Series has the capacity of 16 K-bit, and the organization is 1024-word × 16-bit. It is capable of sequential read, at which time addresses are automatically incremented in 16-bit blocks. The communication method is by the Microwire bus.

📥 Download Datasheet

S-93C86B 3-wire serial e2prom by Seiko Instruments - Datasheet Preview

Datasheet Details

Part number	S-93C86B
Manufacturer	Seiko Instruments
File Size	365.22 KB
Description	3-WIRE SERIAL E2PROM
Download	S-93C86B Download (PDF)

General Description

1 CS Chip select input 2 SK Serial clock input 3 DI Serial data input 4 DO Serial data output 5 GND Ground 6 TEST*1 Test 7 NC No connection 8 VCC Power supply *1.

Connect to GND or VCC.

Even if this pin is no

Key Features

Operating voltage range: Read 2.7 V to 5.5 V (Ta =.
40°C to +105°C) Write 2.7 V to 5.5 V (Ta =.
40°C to +105°C).
Operation frequency: 1.0 MHz (VCC = 4.5 V to 5.5 V, Ta =.
40°C to +105°C).
Write time: 4.0 ms max.
Sequential read capable.
Write protect function during the low power supply voltage.
Function to protect against write due to erroneous instruction recognition.
Endurance: 106 cycles/wor.

📁 Similar Datasheet

Part Number	Description	Manufacturer
S-93C86C	3-WIRE SERIAL E2PROM	Seiko
S-93C86C	3-WIRE SERIAL E2PROM	ABLIC
S-93C86CxxH	3-WIRE SERIAL E2PROM	ABLIC

More Datasheets from Seiko Instruments

Part Number	Description
S-93C86H	3-WIRE SERIAL E2PROM
S-93C46A	CMOS SERIAL E2PROM
S-93C46B	(S-93Cx6B) CMOS SERIAL E2PROM
S-93C56A	CMOS SERIAL E2PROM
S-93C56B	(S-93Cx6B) CMOS SERIAL E2PROM
S-93C66A	CMOS SERIAL E2PROM
S-93C66B	(S-93Cx6B) CMOS SERIAL E2PROM
S-93C76A	3-WIRE SERIAL E2PROM
S-93A46A	(S-93Ax6A) CMOS SERIAL E2PROM
S-93A56A	(S-93Ax6A) CMOS SERIAL E2PROM