Seme LAB SMP600G-FL
The SMP600G-FL is a Silicon P.I.N. The electrical terminations are via two leads of diameter 0.018" on a pitch centre diameter of 0.2". The can structure incorporates an photoptic response optical filter with peak transmission at 510nm.| Part No. | SMP600G-FL |
|---|---|
| Datasheet | SMP600G-FL Download |
| Manufacturer |  Seme LAB |
| Description | PHOTODIODE |
| Buy | Stock & Price |
MECHANICAL DATA
Dimensions in mm. P.I.N. PHOTODIODE 20 3.8 ± 0.2 WINDOW Ø 5.9 ± 0.1 Ø 9.1 ± 0.2 Ø 8.1 ± 0.1 SENSITIVE SURFACE Ø 0.45 LEAD 5.08 ± 0.2 3 21 TO-39 Package Pin 1 – Anode Pin 2 –Cathode Pin 3 – CaseFEATURES
● HIGH SENSITIVITY● EYE RESPONSE DETECTION
● PHOTODIODE ISOLATED FROM PACKAGE
● EXCELLENT LINEARITY
● LOW NOISE
● WIDE SPECTRAL RESPONSE
● BG18 INTEGRAL OPTICAL FILTER
● TO39 HERMETIC METAL CAN PACKAGE
● EMI SCREENING MESH AVAILABLE
DESCRIPTION
The SMP600G-FL is a Silicon P.I.N. photodiode incorporated in a hermetic metal can package. The photodiode is electrically isolated from the package, which has a separate earth lead. The larger photodiode active area provides greater sensitivity than the SMP550 range of devices, with a slight reduction in speed. Inherent in the device geometry is a reduction in the receiving angle. The photodiode structure has been optimised for high sensitivity, asymmetric light measurement applications. The metal can, isolated photodiode and optional screening mesh ensure a rugged device with a high degree of immunity to conducted and radiated electrical interference.