Seme LAB SMP600G-FM
The SMP600G-FM is a Silicon P.I.N. The electrical terminations are via two leads of diameter 0.018" on a pitch centre diameter of 0.2". The can structure incorporates an optical filter that only transmits infra-red light.| Part No. | SMP600G-FM |
|---|---|
| Datasheet | SMP600G-FM Download |
| Manufacturer |  Seme LAB |
| Description | PHOTODIODE |
| Buy | Stock & Price |
MECHANICAL DATA
Dimensions in mm. P.I.N. PHOTODIODE WINDOW Ø 5.9 ± 0.1 Ø 9.1 ± 0.2 Ø 8.1 ± 0.1 SENSITIVE SURFACE Ø 0.45 LEAD 5.08 ± 0.2 20 3.8 ± 0.2FEATURES
● HIGH SENSITIVITY● VISIBLE AND UV BLIND
● PHOTODIODE ISOLATED FROM PACKAGE
● EXCELLENT LINEARITY
● LOW NOISE
● WIDE SPECTRAL RESPONSE
● RG850 INTEGRAL OPTICAL FILTER
● TO39 HERMETIC METAL CAN PACKAGE
● EMI SCREENING MESH AVAILABLE 3 21 TO-39 Package Pin 1 – Anode Pin 2 – Cathode Pin 3 – Case
DESCRIPTION
The SMP600G-FM is a Silicon P.I.N. photodiode incorporated in a hermetic metal can package. The photodiode is electrically isolated from the package, which has a separate earth lead. The larger photodiode active area provides greater sensitivity than the SMP550 range of devices, with a slight reduction in speed. Inherent in the device geometry is a reduction in the receiving angle. The photodiode structure has been optimised for high sensitivity, light measurement applications. The metal can, isolated photodiode and optional screening mesh ensure a rugged device with a high degree of immunity to conducted and radiated electrical interference.