Datasheet4U Logo Datasheet4U.com

ACS1790T - PLL Frequency Synthesizer

Description

6 DEVICE OPERATION 7 THE VCO PLL BLOCK 7 THE OUTPUT DIVIDER BLOCK8 THE OUTPUT STAGE 8 THE CONTROL BLOCK 8 Reset9 USING THE ACS1790T 9 HARDWARE DEVICE CONFIGURATION9 Input clock frequency selection 9 Default output frequency selection 10 REGISTER-BASED DEVICE CONFIGURATION 10 I2C slave address select

Features

  • Optimised for Synchronous Ethernet, SONET and SDH operation.
  • Meets RMS jitter requirements of Gigabit Ethernet, 10 Gigabit Ethernet and OC-48 / STM16.
  • Default options for 25 MHz & 125 MHz or 25 MHz & 156.25 MHz outputs at reset.
  • High frequency LVPECL output: 10 MHz.
  • 200 MHz, 1 ppb step.
  • Low frequency LVCMOS output: 2 kHz.
  • 125 MHz 1.8V, 2.5V and 3.3V operation.
  • Very-low frequency feedback clock output for connection to ToPSync® or external PFD.

📥 Download Datasheet

Datasheet Details

Part number ACS1790T
Manufacturer SEMTECH
File Size 1.08 MB
Description PLL Frequency Synthesizer
Datasheet download datasheet ACS1790T Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SCL SDA A0 FBCLK A1 VDDD2 ADVANCED COMMUNICATIONS PRODUCT GROUP Introduction The ACS1790T is a high-performance, low phase noise, programmable frequency synthesizer with ultra-fine dynamic output frequency control. It can be used as a companion to a compatible ToPSync™ device to generate outputs locked to an external reference source or standalone for standard frequency generation for common applications. The circuit includes an integrated VCO, loop filter, phase-and-frequency detector and output dividers. The default power-up mode is definable by pin settings and once operational the ACS1790T is fully-programmable via an I2C interface. The ACS1790T requires only a low-speed external clock input for operation.
Published: |