GS6042 Datasheet | SEMTECH

Features - Supports data rates from 125Mb/s to 6.25Gb/s - SMPTE ST 2081 (proposed), SMPTE ST 424, SMPTE ST 292, and SMPTE ST 259 pliant - Automatic cable equalization - Typical equalized length of Belden 1694A cable: - 80m at 5.94Gb/s - 210m at 2.97Gb/s - 300m at 1.485Gb/s - 500m at 270Mb/s - Supports DVB-ASI at 270Mb/s - Supports MADI at 125Mb/s - Manual bypass control - Programmable carrier detect with squelch threshold adjustment - Automatic power-down on loss of signal - Differential output supports DC-coupling from +1.2V to +3.3V CML logic - Optional 6d B flat band gain on input - Selectable output de-emphasis: 2d B, 6d B, and 8d B - Standard EIA/JEDEC logic for control/status signals - Single +3.3V power supply operation - 180m W power consumption (35m W in sleep) - Operating temperature range: -40ºC to +85ºC - Small footprint QFN package (4mm x 4mm) - Footprint patible with the GS2974A, GS2974B, GS2984, GS2994, and GS3440 - Pb-free and Ro HS pliant Applications - SMPTE ST 2081 (proposed), SMPTE ST 424, SMPTE ST 292, and SMPTE ST 259 coaxial cable serial digital interfaces - Serialized 8b/10b encoded video streams up to 6.25Gb/s Description The GS6042 is a high-speed Bi CMOS device designed to optimally equalize and restore signals received over 75Ω coaxial cable. The device supports data rates up to 6.25Gb/s while being optimized for the proposed SMPTE ST 2081, as well as SMPTE ST 424, SMPTE ST 292, and SMPTE ST 259. The GS6042 features DC restoration to pensate for the DC content of SMPTE pathological signals. The Carrier Detect output pin (CD) indicates whether an input signal has been detected. It can be connected directly to the SLEEP pin to enable automatic sleep on loss of input. A CD threshold is set via the SQ_ADJ pin, allowing the GS6042 to distinguish between small amplitude SDI signals and noise at the input of the device. The equalizing and DC restore stages are disengaged and no equalization occurs when the BYPASS pin is HIGH. This is useful for...