Datasheet4U Logo Datasheet4U.com

RClamp3324P - 4-Line Surge and ESD Protection

General Description

RailClamp® 3324P provides ESD protection for highspeed data interfaces.

Key Features

  • a high maximum ESD withstand voltage of ±17kV contact and ±20kV air discharge per IEC 61000-4-2. RClamp3324P is designed to minimize both the ESD peak clamping and the TLP clamping. Package inductance is reduced at each pin resulting in lower peak ESD clamping voltage. The dynamic resistance is among the industry’s lowest at 0.15 Ohms (typical). Maximum capacitance on each line to ground is 0.65pF allowing the RClamp3324P to be used in.

📥 Download Datasheet

Datasheet Details

Part number RClamp3324P
Manufacturer SEMTECH
File Size 1.10 MB
Description 4-Line Surge and ESD Protection
Datasheet download datasheet RClamp3324P Datasheet

More Datasheets from SEMTECH

Part Number Description
RClamp3321P 3.3V ESD protection
RClamp3328P 8-Line ESD Protection
RCLAMP3304N 2.5V & 3.3V TVS Arrays
RClamp3331PQ Low Capacitance ESD and EOS Protection
RClamp3346P 6-Line ESD protection
RCLAMP3354S Low Voltage RClamp Surge Protection
RClamp3361P ESD and EOS Protection
RClamp3371ZC 250fF ESD and EOS Protection
RClamp3374N High Power TVS
RClamp3382P 2-Line Surge and ESD Protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RClamp3324P Low Capacitance RailClamp® 4-Line Surge and ESD Protection PROTECTION PRODUCTS Description RailClamp® 3324P provides ESD protection for highspeed data interfaces. It features a high maximum ESD withstand voltage of ±17kV contact and ±20kV air discharge per IEC 61000-4-2. RClamp3324P is designed to minimize both the ESD peak clamping and the TLP clamping. Package inductance is reduced at each pin resulting in lower peak ESD clamping voltage. The dynamic resistance is among the industry’s lowest at 0.15 Ohms (typical). Maximum capacitance on each line to ground is 0.65pF allowing the RClamp3324P to be used in applications operating in excess of 5GHz without signal attenuation.