Datasheet4U Logo Datasheet4U.com

RClamp3328P - 8-Line ESD Protection

Description

The RClamp®3328P provides low voltage ESD protection for high-speed ports.

Features

  • a high maximum ESD withstand voltage of ±25kV contact and ±30kV air discharge per IEC 61000-4-2. RClamp3328P is designed to minimize both the ESD peak clamping and the TLP clamping. Peak ESD clamping voltage is extremely low and approximately the same at each pin. The dynamic resistance is among the industry’s lowest at 0.35 Ohms (typical). Maximum capacitance on each line to ground is 0.65pF. This allows the RClamp3328P to be used in.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RCLAMP3321P 1-CHANNEL ULTRA LOW CAPACITANCE ESD DIODE Leiditech
RCLAMP3304N 4-Line 3.3V ESD Protection Diode Array Leiditech
RCLAMP3304P (RCLAMP2504P / RCLAMP3304P) 2.5V & 3.3V TVS Arrays Semtech Corporation
Rclamp3311P-N TVS DIODE Leiditech
RCLAMP3331Y TVS DIODE Leiditech

Other Datasheets by SEMTECH

Part Number Description
RClamp3321P 3.3V ESD protection
RClamp3324P 4-Line Surge and ESD Protection
RCLAMP3304N 2.5V & 3.3V TVS Arrays
RClamp3331PQ Low Capacitance ESD and EOS Protection
RClamp3346P 6-Line ESD protection

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PROTECTION PRODUCTS - RailClamp® Description The RClamp®3328P provides low voltage ESD protection for high-speed ports. It features a high maximum ESD withstand voltage of ±25kV contact and ±30kV air discharge per IEC 61000-4-2. RClamp3328P is designed to minimize both the ESD peak clamping and the TLP clamping. Peak ESD clamping voltage is extremely low and approximately the same at each pin. The dynamic resistance is among the industry’s lowest at 0.35 Ohms (typical). Maximum capacitance on each line to ground is 0.65pF. This allows the RClamp3328P to be used in applications operating in excess of 5GHz without signal attenuation. These devices are manufactured using Semtech’s proprietary low voltage EPD technology for superior characteritics at operating voltages up to 3.3 volts.
Published: |