Datasheet4U Logo Datasheet4U.com

SC220 - Synchronous Step-Down Regulator

Description

The SC220/Q is a 20MHz X-EMI™(1)-enabled step-down regulator optimized for power low voltage rails from 2.7 to 5.5V input voltage.

X-EMI™ inductor technology enables inductors to be drawn directly on the PC board.

Features

  • 20MHz, 650mA, X-EMI™-Enabled Synchronous Step-Down Regulator.

📥 Download Datasheet

Datasheet Details

Part number SC220
Manufacturer SEMTECH
File Size 811.33 KB
Description Synchronous Step-Down Regulator
Datasheet download datasheet SC220 Datasheet

📁 Similar Datasheet

  • SC220 - XpressFlow 2020 Ethernet Routing Switch Chipset (Zarlink)
  • SC2200 - Thin Client On a Chip (National Semiconductor)
  • SC2200-01UTG - Unidirectional Discrete TVS Diode (Littelfuse)
  • SC2202 - High Sensitive Digital-Bipolar Hall Effect Sensor (Semiment)
  • SC221 - SFP/SFP+ CAGES&CONNECTOR (VITALCONN)
  • SC22101 - Electrically Erasable / Programmable Memories (Sierra)
  • SC222 - SFP/SFP+ CAGES&CONNECTOR (VITALCONN)
  • SC22201 - Electrically Erasable / Programmable Memories (Sierra)
  • SC22201 - Electrically Erasable Programmable Memories (Sierra)
  • SC223 - SFP/SFP+ CAGES&CONNECTOR (VITALCONN)
Other Datasheets by Semtech
  • SC220Q - Synchronous Step-Down Regulator
  • SC221 - Synchronous Step-Down Regulator
  • SC21150 - Tiny 1.2A Synchronous Buck Regulator
  • SC21152 - Tiny 1.2A Synchronous Buck Regulator
  • SC2463 - High Performance Quad Output Switching Regulator
  • SC2516 - Complete Three-in-One DDR Power
  • SC2598 - Low Voltage DDR Termination Regulator
  • SC2612A - 600kHz/200kHz Step-Down DC/DC Converter

Full PDF Text Transcription

Click to expand full text
SC220 x SC220Q POWER MANAGEMENT Features  20MHz, 650mA, X-EMI™-Enabled Synchronous Step-Down Regulator Description The SC220/Q is a 20MHz X-EMI™(1)-enabled step-down regulator optimized for power low voltage rails from 2.7 to 5.5V input voltage. X-EMI™ inductor technology enables inductors to be drawn directly on the PC board. This technology meets or exceeds the EMI performance of chip inductors and eliminates the need for discrete inductors. The SC220/Q uses a unique constant frequency, selfoscillating control loop architecture to provide excellent transient performance. Under light loads, the device operates in Power Save mode(PSAVE) maintaining a typical quiescent current of 19µA. At moderate to heavy loads, this part operates in PWM mode with a constant switching frequency of 20MHz.
Published: |