Datasheet4U Logo Datasheet4U.com

SC600 - mAhXLifeTM LED Driver with 5.0V a 4.5V or 4.0V Output

General Description

The SC600 is a versatile charge pump designed for use in battery operated power supply applications.

The wide input range is matched for Li-Ion battery applications.

Key Features

  • ‹ Small size - MLPD 10 lead 3x3mm or MSOP-10 package allows for a complete solution in .05 sq. in. ‹ Peak efficiency over 90% (extends battery life) ‹ Four component versions available ‹ 60mA versions available in 5.0V and 4.5V output ‹ 120mA versions available in 4.5V and 4.0V output ‹ Short-circuit and over-temperature protection ‹ Soft-start function ‹ Shutdown current.

📥 Download Datasheet

Datasheet Details

Part number SC600
Manufacturer SEMTECH
File Size 508.24 KB
Description mAhXLifeTM LED Driver with 5.0V a 4.5V or 4.0V Output
Datasheet download datasheet SC600 Datasheet

Other Datasheets by SEMTECH

Part Number Description
SC603 CHARGE PUMP REGULATOR WITH SELECTABLE 5.0V/4.5V OUTPUT
SC604A Low Noise - High Efficiency Regulated White LED Driver
SC605 Charge Pump Flash LED Driver
SC606 Low Noise Smart LED Driver with Serial Interface
SC618 Charge Pump Flash LED Driver
SC630 Fixed 3.3V High Output Charge Pump Buck/Boost Regulator
SC630A 1MHz Fixed 3.3V Output Charge Pump Regulator
SC631 Fixed 4.4V Output Charge Pump Regulator
SC632 Fixed 5.0V Output Charge Pump Regulator
SC632A 1MHz Fixed 5.0V Output Charge Pump Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
mAhXLife LED Driver with 5.0V, 4.5V, www.DataSheet4U.com or 4.0V Output TM SC600 POWER MANAGEMENT Description The SC600 is a versatile charge pump designed for use in battery operated power supply applications. The wide input range is matched for Li-Ion battery applications. mAhxLifeTM LED Drivers feature a fractional charge pump implementation with efficiency comparable to a switching regulator without costly inductors. Only two tiny ceramic capacitors are required, and the inductorless implementation provides a reduced-EMI solution. Patented low noise mode switching circuitry and constant output current allow the use of extremely small input and output capacitors. The SC600 charge pump can be used for applications that require up to 120mA of output current with a 4.0V or 4.5V output.