SX9500 - Four Channels Capacitive Proximity / Button Solution

Semtech

The SX9500 by Semtech is a Four Channels Capacitive Proximity / Button Solution. Below is the official datasheet preview.

Datasheet Details

Part number	SX9500
Manufacturer	Semtech
File Size	1.03 MB
Description	Four Channels Capacitive Proximity / Button Solution
Datasheet	SX9500_Semtech.pdf
Additional preview pages of the SX9500 datasheet.

The SX9500 is a low-cost, very low power 4-channel capacitive controller that can operate either as a proximity or button sensor.

2.7.
5.5V Input Supply Voltage Capacitive Sensor Inputs Down to 0.08 fF Capacitance Resolution Stable Proximity & Touch Sensing With Temperature Capacitance Offset Compensation to 30pF Active Sensor Guarding Automatic Calibration Ultra Low Power Consumption: Active Mode: Doze Mode: Sleep Mode: 170 uA 18 uA 2.5 uA 400KHz I2C Serial Interface Four programmable I2C Sub-Addresses Input Levels Compatible with 1.8V Host Processors Open Drain NIRQ Interrupt pin Three (3) Reset S.

📁 SX9500 Similar Datasheet

Other Datasheets by Semtech

SX9510 - 8 Capacitive Buttons / LEDs and IR Decoder and Proximity Controller
SX9511 - 8 Capacitive Buttons / LEDs and IR Decoder and Proximity Controller
SX9512 - 8 Capacitive Buttons / LEDs and Proximity Controller
SX9512B - 8 Capacitive Buttons / LEDs and Proximity Controller
SX9513 - 8 Capacitive Buttons / LEDs and Proximity Controller
SX9513B - 8 Capacitive Buttons / LEDs and Proximity Controller

Published: Oct 23, 2012 |