Datasheet4U Logo Datasheet4U.com

TS14002 Datasheet Ultra-Low-Power Linear Regulator

Manufacturer: SEMTECH

📥 Download Datasheet

Datasheet Details

Part number TS14002
Manufacturer SEMTECH
File Size 554.46 KB
Description Ultra-Low-Power Linear Regulator
Datasheet download datasheet TS14002 Datasheet

General Description

The TS14002 linear regulator is an ultra-low-power circuit which draws low nA level quiescent current at light load, but has the capability to regulate current loads as high as 200mA.

Applications • Portable electronics • RFID • Industrial • Medical • Energy harvesting systems • SmartCard Typical Applications TS14002 VCC CBYP EN GND VOUT FB Load COUT TS14002 Final Datasheet February 16, 2016 Rev 1.1 www.semtech.com 1 of 13 Semtech Block Diagram VCC EN Current Limit Reference Voltage VOUT FB Pin Description Pin # Pin Name 1 GND Pin Type (1) P 2V OUT 3 NC O 4 NC 5 NC 6 FB I 7V CC 8 EN (1) I = Input, O = Output, P = Power P I GND Description Ground Regulated Output Voltage No Connect (connect to GND or float) No Connect (connect to GND or float) No Connect (connect to GND or float) Feedback Input Input Power Enable Input Absolute Maximum Rating Over operating free–air temperature range unless otherwise noted(2, 3, 4) Parameter V , V , EN, FB CC OUT Electrostatic Discharge (Human Body Model) Value -0.3 to 6.0 2 Unit V kV Operating Junction Temperature Range, T J -20 to 85 °C Storage Temperature Range, T STG -65 to 150 °C Lead Temperature (soldering, 10 seconds) 260 °C (2) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device.

These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not imp

Overview

TS14002 nanoSmart® Ultra-Low-Power Linear Regulator TRIUNE PRODUCTS.

Key Features

  • Ultra-low nA operating current at light load.
  • Best-in-class quiescent current of 20nA at Iload=0.
  • Best-in-class quiescent current of 100pA in disable mode.
  • Output voltage options of 1.2V - 4.2V in 100mV steps (pro- grammed at manufacturing).
  • Accurate output regulation.
  • Over-current protection Summary Specifications.
  • Low input operating voltage of 2.5V to 5.5V.
  • Packaged in a 8pin DFN (2x2).

More Datasheets from SEMTECH

Part Number Description
TS12001 Battery Management Under-Voltage Load Switch
TS13101 Galvanic Isolated Latching 60V Power Load Switch
TS13401 Solid State Relay Driver
TS13501 Solid State Relay