Datasheet4U Logo Datasheet4U.com

uClamp0801T - 1-Line ESD protection

Description

The μClamp® series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD.

It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics.

Features

  • large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClamp0801T is in a 2-pin, SLP1006P2T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.65mm and are finished with lead-free NiPdAu. Each device will protect one line operating at 8 volts. It gives the de.

📥 Download Datasheet

📁 Similar Datasheet

  • UCLAMP0501H - 1-Line ESD protection (Semtech Corporation)
  • UCLAMP0501P - 1-Line ESD protection (Semtech Corporation)
  • UCLAMP0501T - 1-Line ESD protection (Semtech Corporation)
  • UCLAMP0502P - 2-Line ESD protection (Semtech Corporation)
  • UCLAMP0502T - 2-Line ESD protection (Semtech Corporation)
  • UCLAMP0504A - 4-Line ESD protection Array (Semtech Corporation)
  • UCLAMP0504T - Low Profile Clamp 4-Line ESD Protection (Semtech Corporation)
  • UCLAMP0505A - 5-Line ESD protection Array (Semtech Corporation)
  • UCLAMP0506A - 5-Line ESD protection Array (Semtech Corporation)
  • UCLAMP0506P - 6-Line ESD protection Array (Semtech Corporation)
Other Datasheets by Semtech

Full PDF Text Transcription

Click to expand full text
PROTECTION PRODUCTS - MicroClamp® Description The μClamp® series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics. It features large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClamp0801T is in a 2-pin, SLP1006P2T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.65mm and are finished with lead-free NiPdAu.
Published: |