900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Semtech Corporation

EClamp8052P Datasheet Preview

EClamp8052P Datasheet

2-Line Common Mode Filter and Low Capacitance ESD Protection

No Preview Available !

EClamp8052P
2-Line Common Mode Filter
and Low Capacitance ESD Protection
PROTECTION PRODUCTS - EMIClamp®
PRELIMINARY
Description
Features
EClamp®8052P integrates common mode filtering with
low capacitance ESD protection and is designed
specifically for MIPI, MHL, and HDMI interfaces. Each
device provides filtering and ESD protection for one
high-speed differential pair.
EClamp8052P is an easily implemented solution for
replacing discrete common mode chokes and ESD
protection devices in a single package. These devices
utilize silicon avalanche technology for superior ESD
and TLP clamping performance. They feature high
maximum ESD withstand voltage of +/- 25kV contact,
+/-30kV air discharge per IEC 61000-4-2. The inte-
grated common-mode choke has a typical differential
mode cutoff frequency >3GHZ and typical common
mode suppression of 10dB at 500MHz and 15dB from
1GHz to 2.8GHz. Each channel series resistance is
1.8 Ohms maximum.
EClamp8052P is in a 7-pin SGP1917N5 package,
measuring 1.9 x 1.7mm with a nominal height of
0.55mm. The leads have a nominal pin-to-pin pitch of
0.50mm. Flow- through package design simplifies PCB
layout and maintains signal integrity on high-speed
lines.
ESD protection for high-speed data lines to
IEC 61000-4-2 (ESD) ±30kV (air), ±25kV (contact)
IEC 61000-4-5 (Lightning) 6A (8/20μs)
IEC 61000-4-4 (EFT) 40A (5/50ns)
Package design optimized for high speed lines
ESD protection and common mode filtering for two
high-speed lines
High differential bandwidth cutoff frequency
Qualified to AECQ-100
Low ESD clamping voltage
Low dynamic resistance: 0.50 Ohms (Typ)
Solid-state silicon-avalanche technology
Mechanical Characteristics
SGP1917N5 package
Pb-Free, Halogen Free, RoHS/WEEE Compliant
Molding compound flammability rating: UL 94V-0
Marking: Marking code + date code
Packaging: Tape and Reel
Applications
MIPI Camera Serial Interface (CSI)
MIPI Display Serial Interface (DSI)
HDMI Interfaces
MHL Interfaces
USB 2.0 Interfaces
Circuit Diagram
Pin Configuration (Top View)
I/O+ In
I/OIn
GND
I/O+ Out
I/OOut
I/O+ In 1
I/OIn
I/O+ Out
I/OOut
GND
Revision 8/5/2014 1 www.semtech.com




Semtech Corporation

EClamp8052P Datasheet Preview

EClamp8052P Datasheet

2-Line Common Mode Filter and Low Capacitance ESD Protection

No Preview Available !

PROTECTION PRODUCTS
Pin Identification
I/O+ In 1
I/OIn
I/O+ Out
I/OOut
GND
Pin Configuration (Top View)
Absolute Maximum Rating
Rating
Peak Pulse Current (tp = 8/20μs)
ESD per IEC 61000-4-2 (Air)1
ESD per IEC 61000-4-2 (Contact)1
Operating Temperature
Storage Temperature
EClamp8052P
PRELIMINARY
Pin Symbol
Identification
1 I/O+ In Line+ In from Connector (External) Side
2 I/O- In Line- In from Connector (External) Side
3 GND
Ground
4 I/O- Out Line- Out to Chip (Internal) Side
5
I/O+ Out
Line+ Out to Chip (Internal) Side
Symbol
IPP
VESD
TJ
TSTG
Value
6
+/- 30
+/- 25
-55 to +125
-55 to +150
Units
A
kV
°C
°C
© 2014 Semtech Corporation
2
www.semtech.com


Part Number EClamp8052P
Description 2-Line Common Mode Filter and Low Capacitance ESD Protection
Maker Semtech Corporation
PDF Download

EClamp8052P Datasheet PDF





Similar Datasheet

1 EClamp8052P 2-Line Common Mode Filter and Low Capacitance ESD Protection
Semtech Corporation





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy