EDGE728 Datasheet PDF - Semtech Corporation Very High Speed Dual and Quad Channel ECL Delay Lines Specs

EDGE728 - Very High Speed Dual and Quad Channel ECL Delay Lines

Datasheet Summary

Description

e e h The Edge728 is a quad delay and deskew element.

S a Manufactured in a high performance bipolar process, it is designed primarily at for channel deskew applications in Memory Test .DEquipment.

Features

Pin and Functionally Compatible with the Edge 628 and Edge624 in Modes 0 and 2.
Independent Delay Adjustments for Positive and Negative Transitions.
Fanout Mode for One Input Distributed to All Channels.
44-pin MQFP Package with Internal Heat Spreader, 44-pin PLCC with Internal Heat Spreader, or Die Form Functional Block Diagram.

Datasheet Details

Part number	EDGE728
Manufacturer	Semtech Corporation
File Size	151.13 KB
Description	Very High Speed Dual and Quad Channel ECL Delay Lines
Datasheet	EDGE728 Datasheet
Additional preview pages of the EDGE728 datasheet.

📁 Similar Datasheet

Edge710 - 500 MHz Pin Electronics Driver/ Window Comparator/ and Load (Semtech)

Edge749 - Octal Pin Electronics Driver/Receiver (Semtech)

EDGE749 - Octal Pin Electronics Driver/Receiver (Semtech)

Edge118 - Low Skew Clock Spreader (Semtech)

Edge142 - Per Pin timing Deskew w 4x2 Cross Point Switch (Semtech)

Edge646 - Pin Electronics Driver/ Window Comparator/ and Switch Matrix (Semtech)

Edge647 - Pin Electronics Driver/ Window Comparator/ and Switch Matrix (Semtech)

Edge649 - Octal Pin Electronics Driver/Receiver (Semtech)

Edge692 - 200 MHz Monolithic Dual Pin Electronics Driver (Semtech)

Edge693 - 500 MHz Monolithic Dual Pin Electronics Driver (Semtech)

Full PDF Text Transcription

Click to expand full text

m o c . HIGH-PERFORMANCE PRODUCTS – ATE U 4 t Description e e h The Edge728 is a quad delay and deskew element. S a Manufactured in a high performance bipolar process, it is designed primarily at for channel deskew applications in Memory Test .DEquipment. w The w part offers a full scale delay range of ≥ 8.0 ns with independent ± 750 ps adjustment of the falling edge. w The Edge728 has a drive mode, where one input signal is routed to all of the outputs. This mode is particularly useful in a fanout application. The delay value (and resolution) is controlled via an external voltage DAC. This deskew element is designed specifically to be monotonic and stable while delaying a very narrow pulse over a wide delay range.

Published: Feb 10, 2006 |