UCLAMP0505A Datasheet PDF - Semtech Corporation 5-Line ESD protection Array Specs

UCLAMP0505A - 5-Line ESD protection Array

Datasheet Summary

Description

The µClampTM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD.

They are designed for use in applications where board space is at a premium.

Each device requires less than 2.9mm2 of PCB area and will protect up to five lines.

Features

Transient protection for data lines to IEC 61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC 61000-4-4 (EFT) 40A (5/50ns) Protects five I/O lines 1.7 x 1.7 x 0.6mm Ultra-small SC-89 package (1.7 0.6mm) 2 requires less than 2.9mm of PCB area Working voltage: 5V Low leakage current Low operating and clamping voltages Solid-state silicon-avalanche technology Mechanical Characteristics SC-89 (SOT-666) package Molding compound flammability rating: UL 94V-0 Mar.

Datasheet Details

Part number	UCLAMP0505A
Manufacturer	Semtech Corporation
File Size	222.46 KB
Description	5-Line ESD protection Array
Datasheet	UCLAMP0505A Datasheet
Additional preview pages of the UCLAMP0505A datasheet.

📁 Similar Datasheet

uClamp0511T - TVS Diode (Leiditech)

uClamp0301PQ - Low Voltage TVS (SEMTECH)

uClamp03321PQ - 1-Line ESD & Surge Protection (SEMTECH)

uClamp0601ZV - 1-Line ESD & Surge Protection (SEMTECH)

uClamp0761ZV - 1-Line ESD & Surge Protection (SEMTECH)

uClamp0801T - 1-Line ESD protection (Semtech)

UCLAMP1211P - TVS Diode (Leiditech)

UCLAMP1211Z - 1-Line ESD Protection (Semtech)

uClamp1511ZV - 1-Line ESD & Surge Protection (SEMTECH)

uClamp2011ZV - 1-Line ESD & Surge Protection (SEMTECH)

Full PDF Text Transcription

Click to expand full text

µClampTM www.DataSheet4U.com 5-Line ESD protection Array PROTECTION PRODUCTS - MicroClampTM Description The µClampTM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. They are designed for use in applications where board space is at a premium. Each device requires less than 2.9mm2 of PCB area and will protect up to five lines. They are unidirectional devices and may be used on lines where the signal polarities are above ground. TVS diodes are solid-state devices designed specifically for transient suppression. They feature large cross-sectional area junctions for conducting high transient currents.

Published: Apr 2, 2010 |