uClamp0511T Datasheet PDF (1-Line ESD protection) | Download Semtech Corporation uClamp0511T

uClamp0511T - 1-Line ESD protection

Description

The μClamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD.

It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics.

Features

large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClampTM0511T is in a 2-pin, RoHS/WEEE compliant, SLP1006P2T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.65mm and are finished with lead-free NiPdAu. Each device will protect one line operating at 5.

Datasheet Details

Part number	uClamp0511T
Manufacturer	Semtech Corporation
File Size	131.10 KB
Description	1-Line ESD protection
Datasheet	uClamp0511T Datasheet
Additional preview pages of the uClamp0511T datasheet.

📁 Similar Datasheet

uClamp0511T - TVS Diode (Leiditech)

uClamp0301PQ - Low Voltage TVS (SEMTECH)

uClamp03321PQ - 1-Line ESD & Surge Protection (SEMTECH)

uClamp0601ZV - 1-Line ESD & Surge Protection (SEMTECH)

uClamp0761ZV - 1-Line ESD & Surge Protection (SEMTECH)

uClamp0801T - 1-Line ESD protection (Semtech)

UCLAMP1211P - TVS Diode (Leiditech)

UCLAMP1211Z - 1-Line ESD Protection (Semtech)

uClamp1511ZV - 1-Line ESD & Surge Protection (SEMTECH)

uClamp2011ZV - 1-Line ESD & Surge Protection (SEMTECH)

Full PDF Text Transcription

Click to expand full text

Low Profile μClampTM 1-Line ESD protection PROTECTION PRODUCTS - MicroClampTM Description The μClamp series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD. It is designed to replace multilayer varistors (MLVs) in portable applications such as cell phones, notebook computers, and other portable electronics. It features large cross-sectional area junctions for conducting high transient currents. They offer desirable characteristics for board level protection including fast response time, low operating and clamping voltage, and no device degradation. The μClampTM0511T is in a 2-pin, RoHS/WEEE compliant, SLP1006P2T package. It measures 1.0 x 0.6 mm with a nominal height of only 0.4mm. The leads are spaced at a pitch of 0.

Published: Jul 23, 2014 |