SPDC150D28 Datasheet | Sensitron

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATASHEET 5116, Rev C SPDC150D28 SPDC130D28 28V DC Solid State Power Controller Module Description: These high power Solid State Power Controller (SSPC) Modules are designed to operate with minimal losses and heat-sinking / airflow. They have an isolated case easing the installation process. High current bus bar terminals are used to provide good, low-drop interface for the high current input / output. They are microcontroller-based Solid State Relays rated up to 150A designed to be used in high reliability 28V DC applications. These modules have integrated current sensing with no de-rating over the full operating temperature range. These modules are the electronic equivalent to electromechanical circuit breakers with isolated control and status. This series is supplied in 2 SSPC current ratings of 150A and 130A. SPDC150D28: 150A current rating SPDC130D28: 130A current rating pliant Documents & Standards: MIL-STD-704F Aircraft Electrical Power Characteristics 12 March 2004 MIL-STD-217F, Notice 2 Reliability Prediction of Electronic Equipment 28 Feb 1995 Module Features : Extremely Low Power Loss, No De-rating Over the Full Temperature Range Avalanche rated mosfets to handle high levels of line spike Low Weight (325 gms typ) Potted Module Solid State Reliability High Power Density Electrical Features : 28VDC Input with Very Low Voltage Drop; 100m V, typ. @ 150A True I2t Protection up to 8X rating with Nuisance Trip Suppression Instant Trip Protection (1 msec typ) for Loads Above 8X rating Unlimited Interrupt Capability; Repetitive Fault Handling Capability Thermal Memory Internally Generated Isolated Supply to Drive the Switch Low VBias Current: 75m A typ @ 5V DC High Control Circuit Isolation: 750V DC Control to Power Circuit Soft Turn-On to Reduce EMC Issues EMI Tolerant Module Reset with a Low Level Signal; Reset Circuit is Trip-Free TTL/CMOS patible, Digitally Isolated, Input and Outputs Input filter for Noise...