900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Sensor Switch

SBR10 Datasheet Preview

SBR10 Datasheet

SENSOR

No Preview Available !

®
SBR 10
EXTENDED RANGE 360º SENSOR
EMBEDDED SMALL BOX • LINE VOLTAGE • PASSIVE INFRARED (PIR)
SPECIFICATIONS
FEATURES
100% Digital PIR Detection,
Excellent RF Immunity
Self-Contained Relay,
No Power Pack Needed
No Minimum Load Requirements
Compatible w/ Electronic & Magnetic
Ballasts, CFLs, LED, & Incandescents
Interchangeable Hot & Load Wires,
Impossible to Wire in Reverse
Push-Button Programmable
Non-Volatile Settings Memory
Adjustable Time Delays
No Field Calibration or Sensitivity
Adjustments Required
Convenient Test Mode
100 hr Lamp Burn-in Timer
Green LED Indicator
LAMPMAXIMIZER® TECHNOLOGY
• Protects Lamp Life while
Maximizing Energy Savings
• Minimum On Timer (15 min default)
• Occ. Time Delay (10 min default)
• LampMaximizer+ Mode -
Optimizes Lamp Life & Energy
Savings (disabled by default)
• Switch Counter (in 1000’s)
• Total Lamp On Time (in khrs)
PHYSICAL SPECS
SIZE (w/ MOUNTING FLANGE)
3.40” H x 3.40” W x 1.40” D
(8.64 cm x 8.64 cm x 3.56 cm)
WEIGHT 6 oz
MOUNTING 2.65” (6.73 cm) square
opening in fixture (minimum depth
1.50” (3.8 cm))
COLOR White
ELECTRICAL SPECS
MAXIMUM LOAD
800 W @ 120 VAC
1200 W @ 277 VAC
1500 W @ 347 VAC
MINIMUM LOAD None
MOTOR LOAD 1/4 HP
FREQUENCY 50/60 Hz
DIMMING LOAD Sinks < 20mA;
~40 Ballasts @ .5mA each
OVERVIEW
The SBR 10 Series incorporates Passive
Infrared (PIR) technology into a line powered
occupancy sensor to provide maximum viewing
from the ceiling. The SBR 10 sensor recess
mounts into a 2.65” (6.73 cm) square opening
in a fixture. Its circular coverage pattern is
designed for walking motions; making it ideal
for T-shaped intersections in corridors, or
other areas where wall mounting a sensor is
not practical. Low ceiling heights are also best
covered with the SBR 10. For example, when
mounted at only 7 ft (2.13 m), the height of pick
aisles in many distribution centers, the SBR 10
provides a 32 ft (9.75 m) diameter pattern of
coverage.
SENSOR OPERATION
The sensor detects changes in the infrared
energy given off by occupants as they move
within the field-of-view. When occupancy is
detected, a self-contained relay switches the
connected lighting load on. The sensor is line
powered, switches line voltage, and requires no
field calibration or sensitivity adjustments.
LAMPMAXIMIZER®
This sensor also contains patent pending
LampMaximizer technology that allows users
to aggressively target energy savings while
still protecting lamp life. A minimum on timer,
factory set at 15 minutes,www.DataSheet.co.kr helps preserve lamp
life by eliminating all lamp cycles shorter than
lamp manufacturers’ recommendations.
A standard occupancy time delay is also present
that ensures lights turn off (assuming minimum
on timer has elapsed) if no occupancy is
detected. This timer is factory set at 10 minutes
to promote energy savings, but is adjustable
between 30 seconds and 20 minutes. These
adjustments can be done manually, through
the unit’s push-button, or automatically every
two weeks through an advanced mode, called
LampMaximizer+, that determines the optimum
time delay in order to maximize both lamp life
and energy savings. Additionally, this sensor
maintains statistics on total lamp on time and
number of cycles.
ENVIRONMENTAL SPECS
OPERATING TEMP
14º to 160º F (-10º to 71º C)
RELATIVE HUMIDITY
20 to 90% non-condensing
SILICONE FREE
ROHS COMPLIANT
OPTIONS
OCCUPANCY CONTROLLED
DIMMING (D)
• Provides dimming output to control
0-10 VDC dimmable ballasts
• Provides a second occupancy time-out
period that enables the lights to go to a
dim setting before turning off
• Adjustable max/min dim setting
PHOTOCELL (P)
• Auto set-point calibration
• Two selectable modes of operation
• On/Off mode: Photocell has full control
during periods of occupancy
• Inhibit mode: Photocell can prevent
lights from turning on if adequate
daylight is available, but cannot turn
lights off
PHOTOCELL W/ DIMMING (ADC)
• Photocell within sensor maintains total
room light level by controlling levels of
0-10 VDC dimmable ballasts
• Photocell also has full on/off control
during periods of occupancy
• Provides a second occupancy time-out
period that enables the lights to go to a
dim setting before turning off
Note: LampMaximizer+ features not
available with ADC option
347 VAC (347)
• Allows sensor to be powered from
and switch 347 VAC
LOW TEMP/HIGH HUMIDITY (LT)
• Sensor electronics are coated for
corrosion resistance
• Operates down to -40º F/C
• Required for cooler/freezer applications
WATER PROOF OPTIONS
(IP65 / IP65 KIT)
• Sensor is gasketed for inclusion into a
wet location fixture (IP65)
• Sensor is gasketed for inclusion into a
provided 4”x4” wet location junction
box (IP65 KIT)
• Sensor electronics are coated for
corrosion resistance
• Operates down to -40º F/C
CSA LISTED
TITLE 24
ASSEMBLED in U.S.A.
5 YEAR WARRANTY
ORDERING INFO SBR 10 [DIMMING/PHOTOCELL] [VOLTAGE] [TEMP/HUMIDITY/WATER PROOF]
DIMMING / PHOTOCELL CHOOSE ONE ONLY
VOLTAGE
TEMP/HUMIDITY/WATER PROOOF
CHOOSE ONE ONLY
Blank = None
Blank = 120/277 VAC
Blank = Standard
D = Occupancy Controlled Dimming
347 = 347 VAC
LT = Low Temp
P = Photocell
IP65 = Water Proof ( SENSOR ONLY)
ADC = Photocell w/ Dimming
IP65 KIT = Water Proof ( SENSOR & J-BOX)
Datasheet pdf - http://www.DataSheet4U.net/




Sensor Switch

SBR10 Datasheet Preview

SBR10 Datasheet

SENSOR

No Preview Available !

COVERAGE PATTERN
10 EXTENDED RANGE 360º LENS
• Best choice for large motion detection (e.g. walking)
• Viewing angle of 67º in a 360º conical shaped pattern
• Provides 28 ft (8.53 m) radial coverage when mounted to
standard 9 ft (2.74 m) ceiling
• 7 to 15 ft (2.13 to 4.57 m) mounting heights provide 16 to 36 ft
(4.88 to 10.97 m) radial coverage
SIDE VIEW
0 ft 0 m
TOP VIEW
9 2.7
8.5
28
6.4
21
4.3 2.1
14 7
0 m 2.1 4.3 6.4
0 ft 7
14 21
8.5
28
Revised 10.11.11 © 2011 Sensor Switch
*At 9ft Mtg.
A: When walking across beam,
detection will occur at approximately 28 ft
(8.53 m)
B: When walking into beam,
detection will occur at approximately 24 ft
(7.32 m)
8.5 28
4.3 14
0 m 0 ft
4.3 14
8.5 28
WIRING (DO NOT WIRE HOT)
HN
STANDARD WIRING
}BLACK* - Line Input
BLACK* - Load Output *BLACK wires can be reversed
WHITE - Neutral
347 VAC OPTION (347)
Black wires are replaced w/ Red wires
DIMMING OPTIONS (D, ADC)
VIOLET - Connect to Violet control wire from 0-10 VDC
dimmable ballast
GRAY - Connect to Gray common wire from ballast
www.DataSheet.co.kr
INITIAL POWER UP
The sensor’s relay is shipped in a latched closed position so
the lights will come on upon initial power-up. If the lights do not
immediately turn on (initial installation only) the latching relay
opened during shipment and will close within 30 secs.
Note: If the sensor loses power, the internal relay will latch to on.
BLK
BLK
WHT
SWITCH
LOAD
VIO (+)
GRY (-)
[D, ADC] Dimming Options
SENSORS IN PARALLEL
Sensors may be wired in parallel; however, the
maximum load ratings stay the same. Do not wire
sensors with P or ADC option in parallel.
HOT
BLK
BLK
WHT
N
BLK
BLK
LOAD
WHT
N
INSTALLATION
• The SB Series offers a custom look for recess mounting in lighting
fixtures. It mounts inside a 2.65” square opening in a fixture (minimum
depth 1.50”).
• Sensor will detect motions crossing segments more effectively than
motions parallel to beams
• For optimal detection, position sensor such that segments are crossed
upon entrance and unable to view outside the space
PROGRAMMING
Refer to instruction card IC7.001 for default settings and directions on
programming the sensor via the push-button.
PUSH BUTTON
WARNING
Fire Hazard Caution: Maximum Lamps 1500 Watts, Type 347 VAC.
Attention: Risque d’incendie : Pauissance Maximales Des Lampes 1500 Watts, Type 347 VAC.
Warning: The units are intended to be installed by a qualified person with properly rated branch circuit protectors as
per applicable local and national regulations (CEC, NEC).
WARRANTY: Sensor Switch, Inc. warrants these products to be free of defects in manufacture and workmanship for
a period of 60 months. Sensor Switch, Inc., upon prompt notice of such defect, will, at its option, provide a Returned
Material Authorization number and repair or replace returned product.
LIMITATIONS AND EXCLUSIONS: This Warranty is in full lieu of all other representation and expressed and
implied warranties (including the implied warranties of merchantability and fitness for use) and under no circumstances
shall Sensor Switch, Inc. be liable for any incidental or consequential property damages or losses.
TS-SBR-003A
900 Northrop Road, Wallingford, CT 06492 • 1.800.PASSIVE • FX 203.269.9621 • www.sensorswitch.com
Datasheet pdf - http://www.DataSheet4U.net/


Part Number SBR10
Description SENSOR
Maker Sensor Switch
Total Page 2 Pages
PDF Download

SBR10 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 SBR10 SENSOR
Sensor Switch
2 SBR10 (SBR05 - SBR30) Standard Recovery 1-Phase Silicon Bridge Rectifier Assembly
Semtech Corporation
3 SBR100-10J SBR100-10J
Sanyo Semicon Device
4 SBR100-10JS 100V 10A Rectifier
Sanyo Semicon Device
5 SBR100-16JS 160V 10A Rectifier
Sanyo Semicon Device
6 SBR10100 10.0 Amp Schottky Barrier Rectifiers
Secos
7 SBR10100CT 10A SBR Super Barrier Rectifier
Diodes Incorporated
8 SBR10100CT SCHOTTKY RECTIFIER
SMC
9 SBR10100CTB SUPER BARRIER RECTIFIER
Diodes Incorporated





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy