Datasheet4U Logo Datasheet4U.com

GP1S173LCS2F - Compact Transmissive Photointerrupter

Description

GP1S173LCS2F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing.

Features

  • 1. Transmissive with phototransistor output 2. Highlights : Special position hooks compatible with 3 different Plate thicknesses (1.0, 1.2, 1.6mm) Snap insertion 3. Key Parameters : Gap Width : 5mm Slit Width (detector side) : 0.5mm Package : 17 × 12.8 × 8mm (without connector and hooks) Connector : Tyco Electronics JAPAN G. K. (173977-3 and 179228-3) 4. RoHS directive compliant.
  • Agency approvals/Compliance 1. Compliant with RoHS directive (2002/95/EC).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
GP1S10 Photointerrupter with Dust Cover Sharp Electrionic Components
GP1S11 LINEAR OUTPUT TYPE PHOTOINTERRUPTER Sharp Electrionic
GP1S196HCZ0F Compact Transmissive Photointerrupter Sharp Electrionic
GP1S196HCZSF Compact Transmissive Photointerrupter Sharp Electrionic
GP1S01 HIGH SPEED PHOTOINTERRUPTER Sharp Electrionic Components

Other Datasheets by Sharp Corporation

Part Number Description
GP1S194HCZ0F Photointerrupter
GP1S036HEZ Photointerrupter for Detecting Tilt Direction
GP1S29 Subminiature Photointerrupter
GP1S396HCP0F Photointerrupter
GP1A038RBK OPIC Photointerrupter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
GP1S173LCS2F GP1S173LCS2F Gap : 5.0mm Slit : 0.5mm Phototransistor Output, Compact Transmissive Photointerrupter with connector ■Description GP1S173LCS2F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remote-mount or off-board designs. ■Features 1. Transmissive with phototransistor output 2. Highlights : Special position hooks compatible with 3 different Plate thicknesses (1.0, 1.2, 1.6mm) Snap insertion 3. Key Parameters : Gap Width : 5mm Slit Width (detector side) : 0.5mm Package : 17 × 12.8 × 8mm (without connector and hooks) Connector : Tyco Electronics JAPAN G.K.
Published: |