PC3SF11YWZBF Datasheet | Sharp Corporation

Description PC3SF11YVZ Series reinforced insulation type Phototriac Coupler include an infrared emitting diode (IRED) optically coupled to an output Phototriac. These devices feature full wave control and are ideal isolated drivers for medium to high current Triacs. DIP package provides 5.0k V isolation from input to output with superior mutative noise immunity. - Agency approvals/pliance 1. Recognized by UL1577 (Double protection isolation), file No. E64380 (as model No. 3SF11) 2. Approved by CSA, file No. CA95323 (as model No. 3SF11) 3. Approved by BSI : BS-EN60065, file No. 6690/BSEN60950, file No. 7421, (as model No. 3SF11) 4. Approved by SEMKO, EN60065/EN60950, file No. 0033029 (as model No. 3SF11) 5. Approved by DEMKO, EN60065/EN60950, file No. 310107 (as model No. 3SF11) 6. Approved by FIMKO, EN60065/EN60950, file No. 15795 (as model No. 3SF11) 7. Approved by VDE ( ∗) (DIN EN 60747-5-2), file No. 40008189 (as model No. 3SF11) 8. Package resin : UL flammability grade (94V-0) (∗) - Features 1. High repetitive peak off-state voltage (VDRM : 600V) 2. Non-zero crossing functionality 3. IFT ranks available (see Model Line-up section in this datasheet) 4. 6 pin DIP package 5. Reinforced insulation type (MIN. 0.4mm internal separation) 6. Superior noise immunity (d V/dt : MIN. 1 000V/µs) 7. Lead-free ponents are also available (see Model Line-up section in this datasheet) 8. Double transfer mold construction (Ideal for Flow Soldering) 9. High isolation voltage between input and output (Viso(rms) : 5.0k V) DIN EN60747-5-2 : successor standard of DIN VDE0884 Up to Date code "RD" (December 2003), approval of DIN VDE0884. From Date code "S1" (January 2004), approval of DIN EN60747-5-2. - Applications 1. Triggering for Triacs used to switch on and off devices which require AC Loads. For example heaters, fans, motors, solenoids, and valves. 2. Triggering for Triacs used for implementing phase control in applications such as lighting control and temperature control...