GP1A073LCS Overview
GP1A73AJ000F is a standard, OPIC output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remotemount or off-board designs. Agency approvals/pliance.
GP1A073LCS Key Features
- Special position hooks patible with 3 different wall thicknesses (1.0, 1.2, 1.6mm)
- Hinged snap insertion
- Wide operation voltage (2.7 to 5.5V) 3. Key Parameters
- Gap Width : 5mm
- Slit Width (detector side): 0.5mm
- Package : 17×12.8×8mm (without connector and hooks)
- Connector : Tyco Electronics AMP K.K. (PN : 292133-3) or SUMIKO TEC CO., LTD. (PN : GH4A003P000ZA)
- Output Type : High when the object is present with Pullup Resistor. 4. Lead free and RoHS directive pliant
- "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signalpr
- Internal Connection Diagram