GP1S74PJ000F
Description
GP1S74PJ000F is a standard, phototransistor output, transmissive photointerrupter with opposing emitter and detector in a case, providing non-contact sensing. For this family of devices, the emitter and detector are inserted in a case, and a 3-pin connector is included to allow remote-mount or off-board designs.
- Agency approvals/pliance
1. pliant with Ro HS directive
- Applications
1. General purpose detection of object presence or motion. 2. Example : PPC, FAX, Printer
- Features
1. Transmissive with phototransistor output 2. Highlights :
- Special position hooks patible with 3 different plate thicknesses (1.0, 1.2, 1.6mm)
- Snap insertion 3. Key Parameters :
- Gap Width : 5mm
- Slit Width (detector side): 0.5mm
- Package : 17×12.8×8mm (without connector and hooks)
- Connector : Tyco Electronics AMP K.K. (PN : 292133-3) 4. Lead free and Ro HS directive pliant
Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by...
