SGM3003
SGM3003 is SPDT Analog Switch manufactured by SG Micro.
DESCRIPTION
The SGM3003 is a single, low on-resistance, low voltage, bidirectional, single-pole/double-throw (SPDT) CMOS analog switch designed to operate from a single +1.8V to +5.5V supply. Targeted applications include battery powered equipment that benefit from low RON (0.5Ω) and fast switching speeds (t ON = 21ns, t OFF = 9ns).
The on resistance profile is very flat over the full analog signal range. This ensures excellent linearity and low distortion when switching audio signals.
SGM3003 has one normally open switch and one normally closed switch，Each switch conducts equally well in both directions when on.
FEATURES
- Low Voltage Operation: 1.8V to 5.5V
- Low On-Resistance: 0.5Ω (TYP)
- Low On-Resistance Flatness
- -3d B Bandwidth: 30MHz
- Fast Switching Times (V+ = 5V) t ON 21ns t OFF 9ns
- Rail-to-Rail Operation
- Typical Power Consumption (< 0.01μW)
- TTL/CMOS patible
- Microsize Package
PIN CONFIGURATION (TOP VIEW)
SGM3003 is available in a Green MSOP-8 package.
APPLICATIONS
Battery powered, Handheld, and Portable Equipment Cellular/mobile Phones Laptops, Notebooks, Palmtops munication Systems Sample-and-Hold Circuits Audio Signal Routing Audio and Video Switching Portable Test and Measurement Medical Equipment
8 NO
NC 2
7 N.C.
GND 3
6 IN
V+ 4
N.C. = NO CONNECT
MSOP-8
5 N.C.
FUNCTION TABLE
LOGIC 0 1
NC ON OFF
NO OFF ON
SG Micro Corp .sg-micro.
REV. C. 3
Ultra Low ON-Resistance, Low Voltage, SPDT Analog Switch
PACKAGE/ORDERING INFORMATION
MODEL SGM3003
PINPACKAGE
MSOP-8
SPECIFIED TEMPERATURE
RANGE...
