SGM9115 Datasheet | SG Micro

DESCRIPTION SGM9115 is a video buffer which integrates triple 6d B Gain rail-to-rail output driver and triple 3rd output reconstruction filter, it has 9MHz -3d B bandwidth and 44V/µs slew rate. SGM9115 provides improved image quality pared with passive LC filters and discrete drivers solution. Operating from single supplies .. ranging from +2.5V to +5.5V and sinking an ultra-low 6.8m A quiescent current, the SGM9115 is ideally suited for battery powered applications. SGM9115 can be DC-coupled or AC-coupled with input video signal, such as the output stage of DAC to eliminate out-of-band noise. Internal diode clamps and bias circuitry may be used if AC-coupled inputs are required. SGM9115 also integrates an internal level shift circuit which avoids sync-pulse being clipped and allows DC-coupled output. The drivers in SGM9115 can drive DC or AC-coupled single (150Ω) or dual (75 Ω) loads. The SGM9115 has lead (Pb) free SOIC-8 package and ESD(HBM) reaches 8KV. Triple, 9MHz, 3rd Order SDTV Video Filter Drivers FEATURES - Triple 3rd order 9MHz (SD) filters - Transparent input clamping - 6d B output driver Gain and drive dual video load - Rail-to-Rail Output - Input Voltage Range Includes Ground - AC or DC Coupled Inputs - AC or DC Coupled Outputs - Operates from 2.5 V to 5.5 V Single power supply - Low Power (2.3m A/channel) 6.8 m A total Supply Current - Lead (Pb) Free SOIC-8 package APPLICATIONS Video amplifiers Cable and Satellite set top boxes munications devices Video on demand Portable and handheld products Personal video recorders DVD players SDTVs BLOCK DIAGRAM IN1 Transparent Clamp 6 d B 9MHz, 3rd order OUT1 IN2 Transparent Clamp 6 d B 9MHz, 3rd order OUT2 IN3 Transparent Clamp 6 d B 9MHz, 3rd order OUT3 Shengbang Microelectronics Co, Ltd Tel: 86/451/84348461 .sg-micro. REV. B ELECTRICAL CHARACTERISTICS: VS = +5.0V (At RL = 150Ω connected to GND, Vin=1Vpp，and CIN = 0.1µF, all outputs AC coupled with 220µF，unless otherwise noted) SGM9115 PARAMETER...