SiT1408B - Active Resonator Drop-In Replacement

Product Overview

SiTime

Datasheet Details

Part number	SiT1408B
Manufacturer	SiTime
File Size	1.07 MB
Description	Active Resonator Drop-In Replacement
Datasheet	SiT1408B Datasheet
Additional preview pages of the SiT1408B datasheet.

Product details

Description

Pin Symbol 1 XIN/VDD VDD Power Functionality Connect to µC GPIO pin XTAL1 set High via firmware[3] Top View GND 4 3 XOUT/CLK 2 GND Power Electrical ground 3 XOUT/CLK Output CLK output; connect to µC XTAL2 pin (refer to Figure 18 in Application Note section) XIN/VDD 1 2 GND 4 GND Power Electrical GND F

Features

No load capacitors required.
No motional series resistance (ESR) compensation.
No negative resistance testing.
Guaranteed oscillator startup under all conditions.
One active resonator can drive up to two clock inputs.
All-inclusive frequency stability as low as ±20 ppm over extended temperature range (-40°C to 85°C). Refer to SiT1418 and SiT1420 for high temperature options.
Any frequency between 1 MHz and 110 MHz accurate to 6 decimal places.
Qualify jus.

📁 Similar Datasheet

SIT14503 - low dropout linear regulator (SIT)
SIT14503Q - low dropout linear regulator (SIT)
SIT1462Q - CAN FD signal improvement transceiver (SIT)
SIT1463Q - Automotive Signal Improvement Capable CAN FD Transceiver (SIT)
SIT10093-0911 - WIDE INVERTER TRANSFORMER (ETC)
SIT1021Q - Local Interconnect Network transceiver (SIT)
SIT1022Q - Dual channel Local Interconnect Network transceiver (SIT)
SIT1027 - Local Interconnect Network transceiver (SIT)

Other Datasheets by SiTime

SiT1409B - Active Resonator Drop-In Replacement
SiT1418B - Active Resonator Drop-In Replacement
SiT1419B - Active Resonator Drop-In Replacement
SiT1420B - Active Resonator Drop-In Replacement
SiT1421B - Active Resonator Drop-In Replacement
SiT1424B - Active Resonator Drop-In Replacement

Published: Aug 15, 2023 |