TLE 4728 G
Original Version 10.95
Subjects (changes since last revision)
Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible
damage to the integrated circuit.
The listed characteristics are ensured over the operating range of the integrated circuit. Typical
characteristics specify mean values expected over the production spread. If not otherwise
specified, typical characteristics apply at TA = 25 ˚C and the given supply voltage.
In the operating range the functions given in the circuit description are fulfilled.
For detailed technical information about “Processing Guidelines” and “Quality Assurance”
for ICs, see our Data Book “Short Form Catalog”.
This edition was realized using the software system FrameMaker®
Published by Siemens AG, Bereich Halbleiter, Marketing-Kommunikation,
Balanstraße 73, 81541 München
© Siemens AG 1995. All Rights Reserved. Attention please!
As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, pro-
cesses and circuits implemented within components or assemblies.
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved.
For questions on technology, delivery and prices please contact the Semiconductor Group Offices in Germany or the Siemens
Companies and Representatives worldwide (see address list).
Due to technical requirements components may contain dangerous substances. For information on the types in question please
contact your nearest Siemens Office, Semiconductor Group.
Siemens AG is an approved CECC manufacturer.
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement
we will take packing material back, if it is sorted. You must bear the costs of transport.
For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any
Components used in life-support devices or systems must be expressly authorized for such purpose!
Critical components1 of the Semiconductor Group of Siemens AG, may only be used in life-support devices or systems2 with the
express written approval of the Semiconductor Group of Siemens AG.
1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause
the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.
2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sus-
tain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.