71M6543FT/71M6543HT/
71M6543GT/71M6543GHT
Energy Meter ICs
General Description
The 71M6543FT/71M6543HT/71M6543GT/71M6543GHT
(71M654xT) are 4th-generation three-phase metering
systems-on-chips (SoCs) with a 5MHz, 8051-compat-
ible MPU core, low-power RTC with digital temperature
compensation, flash memory, and LCD driver. Our Single
Converter Technology® with a 22-bit delta-sigma ADC,
seven analog inputs, digital temperature compensation,
precision voltage reference, and a 32-bit computation
engine (CE) support a wide range of metering applications
with very few external components.
The 71M654xT devices support optional interfaces to the
71M6x03 series of isolated sensors offering BOM cost
reduction, immunity to magnetic tam- per, and
enhanced reliability. Other features include an SPI
interface, advanced power management, ultra-low- power
operation in active and battery modes, 5KB shared
RAM, and 64KB/128KB flash memory that can be
programmed in the field with code and/or data during
meter operation and the ability to drive up to six LCD
segments per SEG driver pin. High processing and
sampling rates combined with differential inputs offer a
powerful platform for residential meters.
A complete array of code development tools, demonstra-
tion code, and reference designs enable rapid develop-
ment and certification of meters that meet all ANSI and
IEC electricity metering standards worldwide.
The 71M654xT family operates over the industrial tem-
perature range and comes in a 100-pin lead(Pb)-free
LQFP package.
Applications
● Three-Phase Residential, Commercial, and Industrial
Energy Meters
Ordering Information and Typical Operating Circuit appear
at end of data sheet.
Single Converter Technology is a registered trademark of
Silergy Corp.
MICROWIRE is a registered trademark of National
Semiconductor Corp.
Benefits and Features
● SoC Integration and Unique Isolation Technique
Reduces BOM Cost Without Sacrificing Performance
• 0.1% Typical Accuracy Over 2000:1 Current
Range
• Exceeds IEC 62053/ANSI C12.20 Standards
• Four-Quadrant Metering
• 46-64Hz Line Frequency Range with the Same
Calibration
• Phase Compensation (±10º)
• Independent 32-Bit Compute Engine
• 64KB Flash, 5KB RAM (71M6543FT/71M6543HT)
• 128KB Flash, 5KB RAM (71M6543GT/71M6543GHT)
• Built-In Flash Security
• SPI Interface with Flash Program Capability
• Up to Four Pulse Outputs with Pulse Count
• 8-Bit MPU (80515), Up to 5 MIPS
• Full-Speed MPU Clock in Brownout Mode
• LCD Driver Allows Up to 6 Commons/Up to
56 Pins
• Up to 51 Multifunction DIO Pins
• Hardware Watchdog Timer (WDT)
• Two UARTs for IR and AMR
• IR LED Driver with Modulation
• I2C/MICROWIRE® EEPROM Interface
● Innovative Isolation Technology (Uses Companion
71M6xxx Sensor) Eliminates Current Transformers
• Four Current Sensor Inputs with Selectable
Differential
• Selectable Gain of 1 or 8 for One Current Input to
Support Neutral Current Shunt
• High-Speed Wh/VARh Pulse Outputs with
Programmable Width
● Digital Temperature Compensation Improves System
Performance
• Metrology Compensation
• Accurate RTC for TOU Functions with Automatic
Temperature Compensation for Crystal in All
Power Modes
● Power Management Extends Battery Life During
Power Outages
• Three Battery-Backup Modes
-- Brownout Mode (BRN)
-- LCD Mode (LCD)
-- Sleep Mode (SLP)
• Wake-Up on Pin Events and Wake-On Timer
• 1µA in Sleep Mode
Rev 8; 4/16