C8051F064 Datasheet | Silicon Labs

C8051F060/1/2/3/4/5/6/7 8K ISP FLASH MCU Family Analog Peripherals - Two 16-Bit SAR ADCs - 16-bit resolution - ±0.75 LSB INL, guaranteed no missing codes - Programmable throughput up to 1 Msps - Operate as two single-ended or one differential con- verter - Direct memory access; data stored in RAM without software overhead - Data-dependent windowed interrupt generator - 10-bit SAR ADC (C8051F060/1/2/3) - Programmable throughput up to 200 ksps - 8 external inputs, single-ended or differential - Built-in temperature sensor - Two 12-bit DACs (C8051F060/1/2/3) - Can synchronize outputs to timers for jitter-free wave- form generation - Three Analog parators - Programmable hysteresis/response time - Voltage Reference - Precision VDD Monitor/Brown-Out Detector On-Chip JTAG Debug & Boundary Scan - On-chip debug circuitry facilitates full-speed, nonintrusive in-circuit/in-system debugging - Provides breakpoints, single-stepping, watchpoints, stack monitor; inspect/modify memory and registers - Superior performance to emulation systems using ICE-chips, target pods, and sockets - IEEE1149.1 pliant boundary scan - plete development kit High Speed 8051 μC Core - Pipelined instruction architecture; executes 70% of instruction set in 1 or 2 system clocks - Up to 25 MIPS throughput with 25 MHz clock - Flexible Interrupt sources Memory - 4352 Bytes internal data RAM (4 k + 256) - 64 k B (C8051F060/1/2/3/4/5), 32 k B (C8051F066/7) Flash; In-system programmable in 512-byte sectors - External 64 k B data memory interface with multi- plexed and non-multiplexed modes (C8051F060/2/ 4/6) Digital Peripherals - 59 general purpose I/O pins (C8051F060/2/4/6) - 24 general purpose I/O pins (C8051F061/3/5/7) - Bosch Controller Area Network (CAN 2.0B C8051F060/1/2/3) - Hardware SMBus™ (I2C™ patible), SPI™, and two UART serial ports available concurrently - Programmable 16-bit counter/timer array with 6 capture/pare modules - 5 general purpose 16-bit...