C8051F703 Datasheet | Silicon Labs

CROSSBARNot Remended for New Designs Ext. Memory I/F Capacitance to Digital Converter - Supports buttons, sliders, wheels, capacitive prox- imity, and touch screen sensing - Up to 38 input channels - Fast 40 µs per channel conversion time - 12, 13, 14, or 16-bit output - Auto-scan and wake-on-touch - Auto-accumulate 4, 8, 16, 32, or 64 samples 10-Bit Analog to Digital Converter - Up to 500 ksps - Up to 16 external single-ended inputs - VREF from on-chip VREF, external pin or VDD - Internal or external start of conversion source - Built-in temperature sensor Analog parator - Programmable hysteresis and response time - Configurable as interrupt or reset source On-Chip Debug - On-chip debug circuitry facilitates full speed, non- intrusive in-system debug (no emulator required) - Provides breakpoints, single stepping, inspect/modify memory and registers - Superior performance to emulation systems using ICE-chips, target pods, and sockets - Low cost, plete development kit Supply Voltage 1.8 to 3.6 V - Built-in voltage supply monitor C8051F70x/71x Mixed Signal ISP Flash MCU Family High-Speed 8051 µC Core - Pipelined instruction architecture; executes 70% of instructions in 1 or 2 system clocks - Up to 25 MIPS throughput with 25 MHz clock - Expanded interrupt handler Memory - 512 bytes internal data RAM (256 + 256) - Up to 16 k B Flash; In-system programmable in 512- byte Sectors - Up to 32-byte data EEPROM Digital...