Datasheet4U Logo Datasheet4U.com

SI52143 - CLOCK GENERATOR

Description

The Si52143 is a spread-spectrum enabled PCIe clock generator that can source four PCIe clocks and a 25 MHz reference clock.

Features

  • PCI-Express Gen 1, Gen 2, Gen 3,.
  • Four PCI-Express clocks and Gen 4 common clock compliant.
  • 25 MHz reference clock output.
  • Gen 3 SRNS Compliant.
  • 25 MHz crystal input or clock input.
  • Supports Serial ATA (SATA) at.
  • Signal integrity tuning 100 MHz.
  • I2C support with readback.
  • Low power, push-pull HCSL capabilities compatible differential outputs.
  • Triangular spread spectrum profile.
  • No termination resistors required for maximum ele.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
Si52131-A11A CLOCK GENERATOR Skyworks
Si52202 SRIS Clock Generator Skyworks
Si52204 SRIS Clock Generator Skyworks
Si52208 SRIS Clock Generator Skyworks
Si52212 SRIS Clock Generator Skyworks

Other Datasheets by Silicon Laboratories

Part Number Description
SI52146 CLOCK GENERATOR
Si52147 CLOCK GENERATOR
SI52111-A1 PCI-EXPRESS GEN 1 SINGLE OUTPUT CLOCK GENERATOR
SI52111-A2 PCI-EXPRESS GEN 1 SINGLE OUTPUT CLOCK GENERATOR
SI52111-B5 PCI-EXPRESS GEN 3 SINGLE OUTPUT CLOCK GENERATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Si52143 PCI-EXPRESS GEN 1, GEN 2, & GEN 3 QUAD OUTPUT CLOCK GENERATOR WITH 25 MHZ REFERENCE CLOCK Features  PCI-Express Gen 1, Gen 2, Gen 3,  Four PCI-Express clocks and Gen 4 common clock compliant  25 MHz reference clock output  Gen 3 SRNS Compliant  25 MHz crystal input or clock input  Supports Serial ATA (SATA) at  Signal integrity tuning 100 MHz  I2C support with readback  Low power, push-pull HCSL capabilities compatible differential outputs  Triangular spread spectrum profile  No termination resistors required for maximum electromagnetic  Dedicated output enable hardware interference (EMI) reduction pins for each clock output  Spread enable pin on differential clocks  Industrial temperature –40 to 85 oC  3.
Published: |