Si82391 Datasheet | Silicon Labs

Si8239x Data Sheet 4.0 A ISODrivers with 2.5 V VDDI and Safety Features The Si8239x bines two isolated drivers with either an independent input control or a single input into a single package for high power applications. All drivers operate with a 2.5 V input VDD and a maximum drive supply voltage of 24 V. The Si8239x isolators are ideal for driving power MOSFETs and IGBTs used in a wide variety of switched power and motor control applications. These drivers utilize Silicon Laboratories' proprietary silicon isolation technology, supporting up to 5 k VRMS withstand voltage. This technology enables high CMTI (100 k V/µs), lower prop delays and skew, reduced variation with temperature and age and tighter part-to-part matching. It also offers some unique Features such as an output UVLO fault detection and feedback, and automatic shutdown for both drivers, an EN (active high) pin, a safe delayed start-up time of 1 ms, fail-safe drivers with default low in case of VDDI power-down, and dead time programmability. The Si8239x family offers longer service life and dramatically higher reliability pared to opto-coupled gate drivers. Automotive Grade is available for certain part numbers. These products are built using automotive-specific flows at all steps in the manufacturing process to ensure the robustness and low defectivity required for automotive applications. Industrial Applications - Power Delivery Systems - Motor Control Systems - Isolated DC-DC Power Supplies - Lighting Control Systems - Solar and Industrial Inverters Safety Approvals (Pending) - UL 1577 recognized - Up to 5000 Vrms for 1 minute - CSA approval - IEC60950-1, 62368-1 (reinforced insulation) - VDE certification conformity - VDE 0884-10 (basic insulation) - EN60950-1, 62368-1 (reinforced insulation) - CQC certification approval - GB4943.1-2011 (reinforced insulation) Automotive Applications - On-board chargers - Battery management systems - Charging stations - Traction inverters - Hybrid...