SST58SM032 Datasheet | Silicon Storage Technology

FEATURES : - ATA/IDE standard interface - 512 Bytes per sector - ATA mand set patible - Selectable Master/Slave Operation - Support Data Transfer Speed up to PIO Mode-4 - 8, 16, 24, 32, 48, 64, 96, 128, and 192 MByte capacities - Standard Female IDE Connector - 40-pin and 44-pin - Single Voltage Read and Write Operation - 5.0V-only for SST58SMxxx - 3.3V-only for SST58LMxxx - Supports 5.0-Volt or 3.3-Volt Read and Write - 4.5-5.5V or 3.135-3.465V for mercial - Low Power Consumption - Active mode: 35 m A/55 m A (3.3V/5.0V) (typical) - Sleep mode: 100 µA/150 µA (3.3V/5.0V) (typical) - Sustained Write Performance - Up to 1.4 MB/sec (host to flash) - Extended Data Protection and Security - WP# pin for Data Protection - Factory-Programmed, 20-Byte Unique ID number - Controller Overhead mand to DRQ - Less than 0.5 ms - Zero Power Data Retention - Batteries not required for data storage - Start Up Time - Sleep to read: 200 ns (typical) - Sleep to write: 200 ns (typical) - Power-on to Ready:200 ms (typical) - Support for mercial Temperature Range - 0°C to +70°C for Operating mercial - -50°C to +100°C for non-Operating (storage) - Extremely Rugged and Reliable - Built-in ECC support corrects 3 Bytes of error per 512 Byte sector - Intelligent ATA/IDE Controller - Built-in microcontroller with intelligent firmware - Built-in Embedded Flash File System - Power Management...