Datasheet4U Logo Datasheet4U.com

SP26LV431 - High Speed / +3.3V Quad RS-422 Differential Line Driver

Description

The SP26LV431 is a quad differential line driver that meets the specifications of the EIA standard RS-422 serial protocol.

Features

  • Sipex's BiCMOS process allowing low power operational characteristics of CMOS technology while meeting all of the demands of the RS-422 serial protocol over 60Mbps under load. The RS-422 protocol allows up to 10 receivers to be connected to a multipoint bus transmission line. The SP26LV431 features a driver enable control common to all four drivers that places the output pins in a high impedance state. Since the cabling can be as long as 4,000 feet, the RS-422 drivers of the SP26LV431 are equipp.

📥 Download Datasheet

Datasheet Details

Part number SP26LV431
Manufacturer Sipex
File Size 138.20 KB
Description High Speed / +3.3V Quad RS-422 Differential Line Driver
Datasheet download datasheet SP26LV431 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP26LV431 HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE DRIVER Exar
SP26LV432 HIGH SPEED +3.3V QUAD RS-422 DIFFERENTIAL LINE RECEIVER Exar
SP2638C Constant current and constant voltage primary control power switch SPMICRO
SP2638D constant current and constant voltage primary-side controlled power switch SPMICRO
SP2638F Primary side control constant current / constant voltage AC / DC control circuit Shenchuanghui Electronics

Other Datasheets by Sipex

Part Number Description
SP26LV432 High Speed / Low Power Quad RS-422 Differential Line Receiver
SP200 +5V High-Speed RS-232 Transceivers with 0.1mF Capacitors
SP2026 +2.7V to +5.5V USB Power Control Switch
SP204 +5V High-Speed RS-232 Transceivers with 0.1uF Capacitors
SP205 +5V High-Speed RS-232 Transceivers with 0.1uF Capacitors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® Preliminary SP26LV431 High Speed, +3.3V Quad RS-422 Differential Line Driver ■ Quad Differential Line Drivers ■ Compatible with the EIA standard for RS-422 serial protocol ■ High-Z Output Control ■ At Least 60Mbps Transmission Rates ■ 11ns Typical Driver Propagation Delays ■ Less than 1ns Typical Output Skew ■ Single +3.3V Supply Operation ■ Common Driver Enable Control ■ Compatibility with the industry standard 26LV31 ■ Ideal For Use with SP26LV432, Quad Receivers DI1 D01A D01B ENABLE D02B D02A DI2 GND 1 2 3 4 5 6 7 8 SP26LV431 16 VCC 15 DI4 14 D04A 13 D04B 12 ENABLE 11 D0 B 3 10 D0 A 3 9 DI 3 DESCRIPTION The SP26LV431 is a quad differential line driver that meets the specifications of the EIA standard RS-422 serial protocol.
Published: |