Datasheet4U Logo Datasheet4U.com

SP320 - Complete +5V-Only V.35 Interface with RS-232 V.28 Control Lines

Description

The SP320 is a complete V.35 interface transceiver offering 3 drivers and 3 receivers of V.35, and 4 drivers and 4 receivers of RS-232 (V.28).

A Sipex patented charge pump allows +5V only low power operation.

Features

  • 500mV of hysteresis margin to minimize the effects of noisy transmission lines. The inputs also have a 5kΩ resistor to ground; in an open circuit situation the input of the receiver will be forced low, committing the output to a logic high state. The input resistance will maintain 3kΩ-7kΩ over a ±15V range. The maximum operating voltage range for the receiver is ±30V, under these conditions the input current to the receiver must be limited to less than 100mA. The RS-232 receivers can operate to.

📥 Download Datasheet

Datasheet Details

Part number SP320
Manufacturer Sipex
File Size 647.56 KB
Description Complete +5V-Only V.35 Interface with RS-232 V.28 Control Lines
Datasheet download datasheet SP320 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP3203E 3V RS-232 Serial Transceiver Exar
SP3203E 3V RS-232 Serial Transceiver MaxLinear
SP3205 Unidirectional Diode Littelfuse
SP3208 Bidirectional Discrete TVS Littelfuse
SP32 SMD Power Inductors Yue Fat

Other Datasheets by Sipex

Part Number Description
SP3203 3V RS-232 Serial Transceiver with Logic Selector
SP3203E 3V RS-232 Serial Transceiver
SP322 Programmable V.11/V.35 Transceiver
SP3220 +3.0V to +5.5V RS-232 Driver/Receiver Pair
SP3220B High Speed +3.0V to +5.5V RS-232 Driver/Receiver Pair

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
® SP320 Complete +5V-Only V.35 Interface with RS-232 (V.28) Control Lines ■ ■ ■ ■ ■ ■ 10Mbps Data Throughput +5V-Only, Single Supply Operation 3 Drivers, 3 Receivers – V.35 4 Drivers, 4 Receivers – RS-232 80-pin MQFP Surface Mount Packaging Pin Compatible with SP319 DESCRIPTION The SP320 is a complete V.35 interface transceiver offering 3 drivers and 3 receivers of V.35, and 4 drivers and 4 receivers of RS-232 (V.28). A Sipex patented charge pump allows +5V only low power operation. RS-232 drivers and receivers are specified to operate at 120kbps, all V.35 drivers and receivers operate up to 5Mbps. +5V 25, 33, 41, 62, 73 26 + 0.1µF + 0.1µF C1+ VCC VDD 27 32 + 0.1µF 30 C128 C2+ 31 C2- SP320 VSS 0.
Published: |