Datasheet4U Logo Datasheet4U.com

STA-6033Z - Power Amplifier

This page provides the datasheet information for the STA-6033Z, a member of the STA-6033 Power Amplifier family.

Description

Sirenza Microdevices’ STA-6033 is a high efficiency class AB Heterojunction Bipolar Transistor (HBT) amplifier housed in a low-cost surface-mountable plastic package.

Features

  • 802.11a 54Mb/s Class AB Performance Pout = 18dBm @ 3% EVM, 3.3V, 210mA High Gain = 27dB Output Return Loss < -12dB for Linear Tune On-chip Output Power Detector Simultaneous 4.9- 5.9GHz Broadband Pin Compatible with Microsemi LX5506 Robust - Survives RF Input Power = +20dBm Power up/down control < 1μs Functional Block Diagram Vcc Power Up/Down Control Active Bias Active Bias Active Bias www.

📥 Download Datasheet

Datasheet preview – STA-6033Z

Datasheet Details

Part number STA-6033Z
Manufacturer Sirenza Microdevices
File Size 229.53 KB
Description Power Amplifier
Datasheet download datasheet STA-6033Z Datasheet
Additional preview pages of the STA-6033Z datasheet.

📁 Similar Datasheet

  • STA-42D1004 - 2 Phase Hybrid Stepping Motor (Shinano Kenshi)
  • STA-42D1005 - 2 Phase Hybrid Stepping Motor (Shinano Kenshi)
  • STA-42D1006 - 2 Phase Hybrid Stepping Motor (Shinano Kenshi)
  • STA-42D1007 - 2 Phase Hybrid Stepping Motor (Shinano Kenshi)
  • STA-42D2004 - 2 Phase Hybrid Stepping Motor (Shinano Kenshi)
  • STA-42D2005 - 2 Phase Hybrid Stepping Motor (Shinano Kenshi)
  • STA-42D2006 - 2 Phase Hybrid Stepping Motor (Shinano Kenshi)
  • STA-42D2007 - 2 Phase Hybrid Stepping Motor (Shinano Kenshi)
  • STA-42D3004 - 2 Phase Hybrid Stepping Motor (Shinano Kenshi)
  • STA-42D3005 - 2 Phase Hybrid Stepping Motor (Shinano Kenshi)
Other Datasheets by Sirenza Microdevices

Full PDF Text Transcription

Click to expand full text
Product Description Sirenza Microdevices’ STA-6033 is a high efficiency class AB Heterojunction Bipolar Transistor (HBT) amplifier housed in a low-cost surface-mountable plastic package. This HBT amplifier is made with InGaP on GaAs device technology and fabricated with MOCVD for an ideal combination of low cost and high reliability. This product is specifically designed as a final stage for 802.11a equipment in the 4.9 - 5.9 GHz band. It can run from a 3.0V to 3.6V supply. Optimized on-chip impedance matching circuitry provides a 50Ω nominal RF input impedance. A single external output matching circuit covers the entire 4.9-5.9GHz band. The external output match allows for load line optimization for other applications or optimized performance over narrower bands.
Published: |