ST7565S Datasheet (65 x 132 Dot Matrix LCD Controller/Driver)

Part: ST7565S
Manufacturer: Sitronix
Size: 681.94 KB

ST7565S Key Features

VSS = VDD
VSS2 =3.0 V, Quad voltage, V5
11.0 V). Conditions: When displays pattern OFF and the normal mode is selected. Power supply operate on the low 1.8 volt
VSS = 1.8V to 3.3 V (+10% Range) Boost reference voltage: VDD
VSS2 = 1.8V to 3.3V Booster maximum voltage limited VOUT= -13V (+10% Range) Liquid crystal drive power supply: VDD
V5 = 4.0V to 13.0 V Wide range of operating temperatures: -40 to 85°C CMOS process Shipping forms include bare chip and

Other ST7565S Datasheets

Manufacturer	Part Number	Description
Sitronix Technology	ST7565	65 x 132 Dot Matrix LCD Controller/Driver
Sitronix Technology	ST7565P	65 x 132 Dot Matrix LCD Controller/Driver
Sitronix Technology	ST7565V	65 x 132 Dot Matrix LCD Controller/Driver

ST7565S Description

The ST7565S is a single-chip dot matrix LCD driver that can be connected directly to a microprocessor bus. 8-bit parallel or serial display data sent from the microprocessor is stored in the internal display data RAM and the chip generates a LCD drive signal independent of the microprocessor. Because the chips in the ST7565S contain 65x132 bits of display data RAM and there is a 1-to-1 correspondence between the LCD...