900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Skyworks

AAT2786 Datasheet Preview

AAT2786 Datasheet

1.5A Step-Down Converter and 150mA LDO

No Preview Available !

DATA SHEET
AAT2786
1.5A Step-Down Converter and 150mA LDO
General Description
The AAT2786 is a dual output power solution. It includes
a 1.5A, 1.4MHz, high-efficiency step-down converter and
a high performance 150mA LDO regulator. The step-
down regulator output voltage is adjustable from 0.6V to
VIN. The LDO regulator has a factory preset fixed output
voltage from 1.2V to 3.3V.
The step-down converter consumes only 42μA of no-load
quiescent current and is designed to maintain high effi-
ciency throughout the load range. The step-down con-
verter has ultra-low RDS(ON) integrated MOSFETs and can
operate up to 100% duty cycle to enable high output
voltage, high current applications which require a low
dropout threshold. The AAT2786 provides excellent tran-
sient response and high output accuracy across the
operating range. Pulling the MODE/SYNC pin high
enables “PWM Only” mode, maintaining constant fre-
quency and low output ripple across the operating range.
Alternatively, the converter may be synchronized to an
external clock input via the MODE/SYNC pin.
The MicroPower low dropout linear regulator in the
AAT2786 has been specifically designed for high-speed
turn-on and turn-off performance, fast transient response,
and good noise and power supply ripple rejection (PSRR),
making it ideal for powering sensitive circuits with fast
switching requirements.
Over-temperature and short-circuit protection safeguard
the AAT2786 and system components from damage.
Features
 VIN Range : 2.5V to 5.5V
 1.5A Step-Down Converter
VOUT Range: 0.6V to VIN
95% Peak Efficiency
High Efficiency across load range
42μA No Load Quiescent Current
Optional “PWM Only” Low Noise Mode
Current limit and soft start
 150mA LDO Regulator
VOUT Range: 1.2V to 3.3V (Fixed)
High Power Supply Rejection Ratio
Low Output Noise
 Independent Enable Pins
 Integrated Power MOSFETs
 Over-Temperature Protection
 TDFN34-16 Package
• -40°C to +85°C Temperature Range
Applications
 Cellular and Smart Phones
 PDAs, Palmtops
 Digital Still and Video Cameras
 Portable Instruments
 Battery-Powered Applications
Typical Application
BUCK IN
C1
opt
R1
100
C2
10µF
C3
1µF
U1 L1
16 VP
15 VP
LX 1
3.3µH
LX 2
R2
Adj
12 VIN
FB 5
ON/OFF
ON/OFF
AAT2786IRN
13 BUCK_EN
GND
14 MODE/SYNC
4
R3
59k
LDO IN
11 LDOIN LDO_OUT 6
ON/OFF
C6
1µF
9 LDO_EN
8 BYP
PGND 3
C8
10nF 10 N/C
LDO_GND 7
BUCK OUT
C5
Opt C4
22µF
LDO OUT
C7
2.2µF
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202046B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • March 19, 2013
1




Skyworks

AAT2786 Datasheet Preview

AAT2786 Datasheet

1.5A Step-Down Converter and 150mA LDO

No Preview Available !

DATA SHEET
AAT2786
1.5A Step-Down Converter and 150mA LDO
Pin Descriptions
Pin #
1, 2
3
4
5
6
7
8
9
10
11
12
13
14
15,16
Symbol
LX
PGND
GND
FB
LDOOUT
LDO_GND
BYP
LDO_EN
N/C
LDOIN
VIN
BUCK_EN
MODE/SYNC
VP
Description
Step-down converter switching node. Connect the output inductor to this pin. The switching node is
internally connected to the drain of both high- and low-side MOSFETs.
Step-down converter main power ground return pin. Connect to the output and input capacitor return.
Non-power signal ground pin.
Step-down converter feedback input pin. This pin is connected either directly to the converter output or
to an external resistive divider for an adjustable output.
LDO output pin; should be decoupled with 2.2μF ceramic capacitor.
LDO ground connection pin.
LDO bypass capacitor connection; to improve AC ripple rejection, connect a 10nF capacitor to GND. This
will also provide a soft start function.
LDO enable pin; this pin should not be left oating. When pulled low, the LDO PMOS pass transistor
turns off and all internal circuitry enters low-power mode, consuming less than 1μA.
Open
LDO input voltage pin; should be decoupled with 1μF or greater capacitor.
Step-down converter power supply. Supplies power for the internal circuitry.
Step-down converter enable pin. A logic low disables the step-down converter and it consumes less than
1μA of current. When connected high, it resumes normal operation.
Connect to ground for Light-Load/PWM mode and optimized efciency throughout the load range. Con-
nect high for low noise PWM operation under all operating conditions. Connect to an external clock for
synchronization (PWM only).
Step-down converter input voltage for the power switches.
Pin Configuration
TDFN34-16
(Top View)
LX
LX
PGND
GND
FB
LDOOUT
LDO_GND
BYP
1
2
3
4
5
6
7
8
16 VP
15 VP
14 MODE/SYNC
13 BUCK_EN
12 VIN
11 LDOIN
10 N/C
9 LDO_EN
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2 202046B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • March 19, 2013


Part Number AAT2786
Description 1.5A Step-Down Converter and 150mA LDO
Maker Skyworks
Total Page 27 Pages
PDF Download

AAT2786 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 AAT2782 Triple Output PMIC
Advanced Analogic Technologies
2 AAT2782 Triple-Output PMIC
Skyworks
3 AAT2783 Triple-Output PMIC
Skyworks
4 AAT2783 Triple Output PMIC
Advanced Analogic Technologies
5 AAT2784 3-Channel Step-Down DC/DC Converter
Advanced Analogic Technologies
6 AAT2785 3-Channel Step-Down DC/DC Converter
Advanced Analogic Technologies
7 AAT2786 1.5A Step-Down Converter and 150mA LDO
Skyworks
8 AAT2786 1.5A Step-Down Converter and 150mA LDO
Advanced Analogic Technologies
9 AAT2789 High Frequency Dual Step-Down Converter
Advanced Analogic Technologies





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy