SKY65362-11 Datasheet | Skyworks Solutions

Features - Integrated PA with +30.5 d Bm output power - Integrated LNA with programmable bypass - Low FEM NF of 2.5 d B, typical - Single-ended 50 Ω transmit/receive RF interface - Supply voltage: 3.00 V to 5.25 V - Sleep mode current: <1 μA - Small MCM (36-pin, 6 x 6 mm) package (MSL3, 260 C per JEDEC J-STD-020) Skyworks Green TM products are pliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green TM, document number SQ04- 0074. Description The SKY65362-11 is a high-performance, highly integrated RF front-end module (FEM) designed for high-power Industrial, Scientific, Medical (ISM) band applications operating in the 900 to 930 MHz frequency range. The FEM is designed for ease of use and maximum flexibility with fully matched, 50 Ω power amplifier (PA) input and output, and digital controls patible with 1.6 to 3.3 V CMOS levels. The RF blocks operate over a wide supply voltage range from 3.00 to 5.25 V that allows the SKY65362-11 to be used in battery powered applications over a wide spectrum of the battery discharge curve. The SKY65362-11 is packaged in a 36-pin, 6 x 6 mm Multi-Chip Module (MCM), which allows for a highly manufacturable low-cost solution. A functional block diagram of the SKY65362-11 is shown in Figure 1. The 36-pin MCM package and pinout are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. PDETF PDETR IALARM CTX CSD CPS ANT_SEL 2-Stage Ga As PA Logic control ANT1 RX 1-Stage LNA Switch ANT2 Y0205 LNA_IN RX_FLT Figure 1. SKY65362-11 FEM Block Diagram Skyworks Solutions, Inc. - Phone [781] 376-3000 - Fax [781] 376-3100 - sales@skyworksinc. - .skyworksinc. 202886B - Skyworks Proprietary Information - Products and Product Information are Subject to Change Without Notice - January 9, 2015 DATA SHEET - SKY65362-11: HIGH-POWER RF FEM GND VSUP1 VSUP2 VCC1 GND VCC0 GND VCC2 GND 36 35 34 33 32 31 30 29...