Si8233 Datasheet | Skyworks Solutions

Si823x Data Sheet 0.5 and 4.0 Amp ISOdrivers (2.5 and 5 k VRMS) The Si823x isolated driver family bines two independent, isolated drivers into a single package. The Si8230/1/3/4 are high-side/low-side drivers, while the Si8232/5/7/8 are dual drivers. Versions with peak output currents of 0.5 A (Si8230/1/2/7) and 4.0 A (Si8233/4/5/8) are available. All drivers operate with a maximum supply voltage of 24 V. The Si823x drivers utilize Skyworks' proprietary silicon isolation technology, which provides up to 5 k VRMS withstand voltage per UL1577 and fast 45 ns propagation times. Driver outputs can be grounded to the same or separate grounds or connected to a positive or negative voltage. The TTL level patible inputs with >400 m V hysteresis are available in individual control input (Si8230/2/3/5/7/8) or PWM input (Si8231/4) configurations. High integration, low propagation delay, small installed size, flexibility, and cost-effectiveness make the Si823x family ideal for a wide range of isolated MOSFET/IGBT gate drive applications. Automotive Grade is available for certain part numbers. These products are built using automotive-specific flows at all steps in the manufacturing process to ensure the robustness and low defectivity required for automotive applications. Industrial Applications - Power delivery systems - Motor control systems - Isolated dc-dc power supplies - Lighting control systems - Plasma displays - Solar and industrial inverters Automotive Applications - On-board chargers - Battery management systems - Charging stations - Traction inverters - Hybrid Electric Vehicles - Battery Electric Vehicles Safety Regulatory Approvals - UL 1577 recognized - Up to 5000 VRMS for 1 minute - CSA ponent notice 5A approval - IEC 60950-1, 62368-1, 60601-1 (reinforced insulation) - VDE certification conformity - VDE 0884-10 - EN60950-1 (reinforced insulation) - CQC certification approval - GB4943.1 KEY...