Si8655 Datasheet | Skyworks Solutions

Si8650/51/52/55 Data Sheet Low Power Five-Channel Digital Isolator Skyworks' family of ultra-low-power digital isolators are CMOS devices offering substantial data rate, propagation delay, power, size, reliability, and external BOM advantages over legacy isolation technologies. The operating parameters of these products remain stable across wide temperature ranges and throughout device service life for ease of design and highly uniform performance. All device versions have Schmitt trigger inputs for high noise immunity and only require VDD bypass capacitors. Data rates up to 150 Mbps are supported, and all devices achieve propagation delays of less than 10 ns. Enable inputs provide a single point control for enabling and disabling output drive. Ordering options include a choice of isolation ratings (1.0, 2.5, 3.75 and 5 k V) and a selectable fail-safe operating mode to control the default output state during power loss. All products >1 k VRMS are safety certified by UL, CSA, VDE, and CQC, and products in wide-body packages support reinforced insulation withstanding up to 5 k VRMS. Automotive Grade is available for certain part numbers. These products are built using automotive-specific flows at all steps in the manufacturing process to ensure the robustness and low defectivity required for automotive applications. Industrial Applications - Industrial automation systems - Medical electronics - Isolated switch mode supplies - Isolated ADC, DAC - Motor control - Power inverters - munication systems Automotive Applications - On-board chargers - Battery management systems - Charging stations - Traction inverters - Hybrid Electric Vehicles - Battery Electric Vehicles Safety Regulatory Approvals - UL 1577 recognized - Up to 5000 VRMS for 1 minute - CSA ponent notice 5A approval - IEC 60950-1, 62368-1, 60601-1 (reinforced insulation) - VDE certification conformity - VDE 0884-10 - EN60950-1 (reinforced insulation) - CQC certification approval -...