AK002M2-12
AK002M2-12 is GaAs IC SPDT Switch manufactured by Skyworks Solutions.
atures
- Low DC Current < 4 m A Total
- Non-Reflective
- Integral Driver ±5 V Supply Voltages
- Low Cost SOIC-8 Plastic Package
PIN 1 0.020 (0.51 mm) MAX. 0.049 (1.24 mm) 0.016 (0.41 mm) 0.016 MAX. (0.41 mm) x 45˚ CHAMFER PIN 1 INDICATOR 0.244 (6.20 mm) 0.228 (5.80 mm)
SOIC-8
PIN 8 0.050 (1.27 mm) BSC
Description
The Ga As FET IC SPDT non-reflective switch with integral driver is offered in the SOIC-8 package. These devices are useful as modulators as well as switches in instrumentation and telemunications applications. The integral driver simplifies the external drive circuit, thus saving PC board space and reducing ponent count.
0.068 (1.73 mm) MAX.
0.197 (5.00 mm) 0.189 (4.80 mm) 0.010 (0.25 mm) 0.004 (0.10 mm)
0.158 (4.00 mm) 0.150 (3.80 mm) 0.010 (0.25 mm) 0.007 (0.17 mm)
8˚ MAX.
Electrical Specifications at 25°C (+5 V, -5 V)
Parameter1 Insertion Loss3 Frequency2 DC- 0.5 DC- 1.0 DC- 2.0 DC- 2.5 DC- 0.5 DC- 1.0 DC- 2.0 DC- 2.5 GHz GHz GHz GHz GHz GHz GHz GHz 40 30 20 15 Min. Typ. 0.6 0.7 0.9 1.0 42 32 23 17 1.3:1 1.6:1 1.5:1 1.8:1 Max. 0.7 0.8 1.0 1.1 Unit d B d B d B d B d B d B d B d B
Isolation
VSWR (I/O)4
DC- 0.5 GHz DC- 2.5 GHz
..net
Operating Characteristics at 25°C (+5 V, -5 V)
Parameter Switching Characteristics5 Condition Rise, Fall (10/90% or 90/10% RF) On, Off (50% CTL to 90/10% RF) Video Feedthru 0.5- 2.0 GHz 0.05 GHz For Two-tone Input Power +13 d Bm VLow (0) VHigh (1) +5 V ± 0.20 V @ 1 m A Typ. -5 V ± 0.20 V @ 4 m A Typ. 0.5- 2.0 GHz 0.05 GHz 0 4.5 4.8 -4.8 Frequency Min. Typ. 10 20 30 +23 +15 +37 +26 0.2 5.0 5.2 -5.2 Max. Unit ns ns m V d Bm d Bm d Bm d Bm V V V V
Input Power for 1 d B pression Intermodulation Intercept Point (IP3) Logic Drives Supply Voltages6,7
1. All measurements made in a 50 Ω system, unless otherwise specified. 2. DC = 300 k Hz. 3. Insertion loss changes by 0.003 d B/°C. 4. Insertion loss state. 5. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth.
6. Supply voltage must be connected before control voltage is applied. Use...
