AK002M4-47
AK002M4-47 is GaAs IC SP4T Non-Reflective Switch manufactured by Skyworks Solutions.
Features
- Integral Driver ±5 V Supply Voltages
- PLCC-28 Plastic Package
- Single Voltage Control for Each Port
- Non-Reflective on All Ports
- Base Station Switch Matrix Applications
PIN 1 INDICATOR
PLCC-28
0.495 (12.57 mm) 0.485 (12.32 mm) SQ. 0.456 (11.58 mm) 0.450 (11.43 mm) SQ. 0.045 (1.14 mm) 0.025 (0.64 mm)
Description
The AK002M4-47 is a SP4T non-reflective FET IC switch. The switch consists of a Ga As SP4T chip and an integral driver. This unit is ideal for cellular base station switch matrices.
0.180 (4.57 mm) 0.165 (4.19 mm) 0.300 (7.62 mm) REF. 4 PLCS.
0.32 (0.81 mm) 0.26 (0.66 mm)
0.048 (1.22 mm) 0.042 (1.07 mm)
0.050 (1.27 mm) BSC TYP. 0.020 (0.51 mm) MIN.
0.120 (3.05 mm) 0.090 (2.29 mm)
0.021 (0.53 mm) 0.013 (0.33 mm) 28 PLCS.
Electrical Specifications at 25°C (+5, -5 V)
Parameter1 Insertion Loss3 Frequency2 DC- 0.5 DC- 1.0 DC- 2.0 DC- 3.0 DC- 0.5 DC- 1.0 DC- 2.0 DC- 3.0 GHz GHz GHz GHz GHz GHz GHz GHz 48 40 29 25 Min. Typ. 0.8 1.0 1.3 1.8 51 42 33 28 1.3:1 1.5:1 1.7:1 1.5:1 1.7:1 1.9:1 Max. 1.1 1.4 1.6 2.1 Unit d B d B d B d B d B d B d B d B
Isolation
VSWR4
DC- 0.5 GHz DC- 1.0 GHz DC- 3.0 GHz
..net
Operating Characteristics at 25°C (+5, -5 V)
Parameter Switching Characteristics5 Condition Rise, Fall (10/90% or 90/10% RF) On, Off (50% CTL to 90/10% RF) Video Feedthru 0.50- 3.0 GHz 0.05 GHz For Two-tone Input Power +13 d Bm VLow VHigh +5 V ± 0.2 V @ 3 m A Typ. -5 V ± 0.20 V @ 16 m A Typ.6,7 0.50- 3.0 GHz 0.05 GHz 0.0 4.5 Frequency Min. Typ. 15 35 30 +24 +16 +40 +29 0.2 5.0 Max. Unit ns ns m V d Bm d Bm d Bm d Bm V V
Input Power for 1 d B pression Intermodulation Intercept Point (IP3) Control Voltages Supply Voltages
1. All measurements made in a 50 Ω system, unless otherwise specified. 2. DC = 300 k Hz. 3. Insertion loss changes by 0.003 d B/°C. 4. Input/Output. 5. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth. 6. Supply voltage and ground must be connected before control voltage is applied to avoid irreversible damage to the device. 7....
