900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Skyworks Solutions

SKY13330-397LF Datasheet Preview

SKY13330-397LF Datasheet

0.1-6.0 GHz SP2T Switch

No Preview Available !

DATA SHEET
SKY13330-397LF: 0.1-6.0 GHz SP2T Switch
Applications
WCDMA band and mode switching
Antenna switch for multimode systems
Features
Broadband frequency range: 0.1 GHz to 6.0 GHz
Low insertion loss:
0.35 dB @ 2.2 GHz
0.60 dB @ 6 GHz
High IP1dB: +39 dBm
No external DC blocking capacitors required
Positive low control voltage range: 1.65 V to 2.70 V
DC supply voltage: 2.3 V to 4.8 V
Small, QFN (12-pin, 2 x 2 mm) package (MSL1, 260 °C per
JEDEC J-STD-020)
Figure 1. SKY13330-397LF Block Diagram
Description
The SKY13330-397LF is a CMOS, Silicon-On-Insulator (SOI)
Single-Pole, Double-Throw (SP2T) switch. The high linearity and
low insertion loss of the SKY13330-397LF make it an ideal choice
for WCDMA handset and data card applications.
The switch is a “reflective short” on the isolated port.
The SKY13330-397LF SP2T switch is provided in a compact Quad
Flat No-Lead (QFN) 2 x 2 mm package. A functional block diagram
is shown in Figure 1. The pin configuration and package are
shown in Figure 2. Signal pin assignments and functional pin
descriptions are provided in Table 1.
Figure 2. SKY13330-397LF Pinout – 12-Pin QFN
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201407C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • August 17, 2012
1




Skyworks Solutions

SKY13330-397LF Datasheet Preview

SKY13330-397LF Datasheet

0.1-6.0 GHz SP2T Switch

No Preview Available !

DATA SHEET • SKY13330-397LF SP2T SWITCH
Table 1. SKY13330-397LF Signal Descriptions
Pin # Name
Description
1 GND
Ground
2 RF1
RF port 1
3 GND
Ground
4 GND
Ground
5 RF3
RF port 3
6 GND
Ground
Note: Exposed pad must be properly grounded using a low impedance path.
Pin #
7
8
9
10
11
12
Name
CTRL
ENABLE
VBATT
GND
RF2
GND
Description
DC control pin. See Table 4.
Enable pin. See Table 4.
DC power supply
Ground
RF port 2
Ground
Table 2. SKY13330-397LF Absolute Maximum Ratings (Note 1)
Parameter
Symbol
Minimum
Maximum
Units
Supply voltage
BATT 5.0 V
Input power
PIN +40 dBm
Storage temperature
TSTG
40 +125
°C
Operating temperature
TOP
40 +85
°C
Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Functional Description
The SKY13330-397LF is designed for medium to high power
WCDMA handset and data card switching applications. The device
can also be used in a variety of other applications that require
high performance RF switching such as WLANs (a/b/g/n).
An internal negative voltage generator and decoder eliminate the
need for external DC blocking capacitors on the RF ports unless
VDC is externally applied.
Switching is controlled by one voltage input (CTRL). Depending on
the logic voltage level applied to the control pin, the RF1 pin is
connected to one of two switched RF outputs (RF2 or RF3) using a
low insertion loss path, while the path between the RF1 pin and
the other RF output pin is in a high isolation state.
An internal decoder is used to provide the correct logic to the
switch.
Shutdown mode is enabled by connecting the ENABLE pin to logic
low. Shutdown mode reduces the overall current consumption of
the device to 7 μA, typical.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY13330-397LF are
provided in Table 2. Electrical specifications are provided in
Table 3.
The state of the SKY13330-397LF is determined by the logic
provided in Table 4.
Typical performance characteristics of the SKY13330-397LF are
illustrated in Figures 3 through 5.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2 August 17, 2012 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201407C


Part Number SKY13330-397LF
Description 0.1-6.0 GHz SP2T Switch
Maker Skyworks Solutions
Total Page 9 Pages
PDF Download

SKY13330-397LF Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 SKY13330-397LF 0.1-6.0 GHz SP2T Switch
Skyworks Solutions





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy