900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Skyworks Solutions

SKY13370-374LF Datasheet Preview

SKY13370-374LF Datasheet

0.5 to 6.0 GHz SPDT Switch

No Preview Available !

DATA SHEET
SKY13370-374LF: 0.5 to 6.0 GHz SPDT Switch,
50 Ω Terminated
Applications
WiMAX 802.16
Dual-band WLANs (802.11 a/b/g/n)
LTE/4G systems
Features
50 Ω matched RF ports in all states
Low insertion loss: 0.7 dB @ 2.5 GHz
High isolation: 31 dB @ 2.5 GHz
IP1dB: +39 dBm
Small, DFN (6-pin, 1.5 x 1.5 mm) package (MSL1, 260 C per
JEDEC J-STD-020)
RF1
50 Ω
RF2
50 Ω
RFC
S2208
Figure 1. SKY13370-374LF Block Diagram
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
Description
The SKY13370-374LF is a GaAs pHEMT Single-Pole, Double-
Throw (SPDT) high power switch with 50 Ω terminated outputs.
The high linearity performance and low insertion loss achieved by
the SKY13370-374LF make it an ideal choice for WiMAX and
higher power WLAN applications such as access points.
The switch is manufactured in a compact, 1.5 x 1.5 mm, 6-pin
Dual Flat No-Lead (DFN) package.
A functional block diagram is shown in Figure 1. The pin
configuration and package are shown in Figure 2. Signal pin
assignments and functional pin descriptions are provided in
Table 1.
V1 1
6 RF1
RFC 2
5 GND
V2 3
4 RF2
S2207
Figure 2. SKY13370-374LF Pinout – 6-Pin DFN
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201408E • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • February 3, 2014
1




Skyworks Solutions

SKY13370-374LF Datasheet Preview

SKY13370-374LF Datasheet

0.5 to 6.0 GHz SPDT Switch

No Preview Available !

DATA SHEET • SKY13370-374LF SPDT SWITCH
Functional Description
Switching is controlled by two control voltage inputs, V1 and V2
(pins 1 and 3, respectively). Depending on the logic voltage level
applied to the control pins, the RFC pin is connected to one of the
two switched RF outputs, RF1 or RF2, using a low insertion loss
path, while the path between the RFC pin and the other RF pin is
in a high isolation state.
DC blocking capacitors are required on all RF ports of the switch.
The value of the capacitors determines the low frequency
operation. The isolated RF output is internally teminated to 50 Ω.
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY13370-374LF are
provided in Table 2. Electrical specifications are provided in
Table 3.
Typical performance characteristics of the SKY13370-374LF are
illustrated in Figures 3 through 6.
The state of the SKY13370-374LF is determined by the logic
provided in Table 4.
Table 1. SKY13370-374LF Signal Descriptions
Pin Name
Description
1 V1
DC control voltage. A logic high voltage
enables an insertion loss path between the
RFC and RF1 pins.
2 RFC
RF common input. Must be DC blocked.
3 V2
DC control voltage. A logic high voltage
enables an insertion loss path between the
RFC and RF2 pins.
Pin Name
4 RF2
5 GND
6 RF1
Description
RF output: 50 Ω terminated when in
isolation state. Must be DC blocked.
Ground
RF output: 50 Ω terminated when in
isolation state. Must be DC blocked.
Table 2. SKY13370-374LF Absolute Maximum Ratings
Parameter
Symbol
Minimum
Typical
Maximum
Units
Control voltage
VCTL
6V
Input power
PIN
+40 dBm
Storage temperature TSTG –40
+125
C
Operating temperature
TOP
–40
+85 C
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2 February 3, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201408E


Part Number SKY13370-374LF
Description 0.5 to 6.0 GHz SPDT Switch
Maker Skyworks Solutions
Total Page 9 Pages
PDF Download

SKY13370-374LF Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 SKY13370-374LF 0.5 to 6.0 GHz SPDT Switch
Skyworks Solutions





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy