ICX254AL Datasheet | Sony Semiconductor Solutions

Diagonal 6mm (Type 1/3) CCD Image Sensor for EIA B/W Video Cameras Description The ICX254AL is an interline CCD solid-state image sensor suitable for EIA B/W video cameras with a diagonal 6mm (Type 1/3) system. pared with the current product ICX054BL, basic characteristics such as sensitivity, smear, dynamic range and S/N are improved drastically from visible light region to near infrared light region through the adoption of EXview HAD CCDTM technology. This chip Features a field period readout system and an electronic shutter with variable charge-storage time. Features - Sensitivity in near infrared light region (+8d B pared with the ICX054BL, λ = 945nm) - High sensitivity (+6d B pared with the ICX054BL, no IR cut filter) - Low smear (- 20d B pared with the ICX054BL) - High D range (+2d B pared with the ICX054BL) - High S/N - Low dark current - Excellent antiblooming characteristics - Continuous variable-speed shutter - No voltage adjustment (Reset gate and substrate bias are not adjusted.) - Reset gate: 5V drive - Horizontal register: 5V drive 16 pin DIP (Plastic) .. Pin 1 1 12 2 Pin 9 H 25 Optical black position (Top View) Device Structure - Interline CCD image sensor - Image size: Diagonal 6mm (Type 1/3) - Number of effective pixels: 510 (H) × 492 (V) approx. 250K pixels - Total number of pixels: 537 (H) × 505 (V) approx. 270K pixels - Chip size: 6.00mm (H) × 4.96mm (V) - Unit cell size: 9.6µm (H) × 7.5µm (V) - Optical black: Horizontal (H) direction : Front 2 pixels, rear 25 pixels Vertical (V) direction : Front 12 pixels, rear 1 pixel - Number of dummy bits: Horizontal 16 Vertical 1 (even fields only) - Substrate material: Silicon ∗ EXview HAD CCD is a trademark of Sony Corporation. EXview HAD CCD is a CCD that drastically improves light efficiency by including near infrared light region as a basic structure of HAD (Hole-Accumulation-Diode) sensor. Sony reserves the right to change products and specifications...