MT1610A - MODEM Transformer

Description

16.6×16.6mm Max.(L×W),10.5mm Max.

(MT1610C:11.7mm Max.)Height.

Operating frequency: 4MHz Max.

International safety standard approved for reinforced isolation.

Silicone Steel is used.

Ideally used in set-top box,FAX,MODEM.

Dime

Sumida Corporation

📥 Download Datasheet

Datasheet Details

Part number	MT1610A
Manufacturer	Sumida Corporation
File Size	277.14 KB
Description	MODEM Transformer
Datasheet	MT1610A Datasheet
Additional preview pages of the MT1610A datasheet.

📁 Similar Datasheet

MT16D132 - 1 MEG x 32 DRAM MODULES (Micron Technology)
MT16D232 - 2Meg x 32 DRAM (Micron Technology)
MT16D232 - DRAM Module (Micron Technology)
MT16D232x - 1 Meg / 2 Meg x 32 DRAM Module (Micron Technology)
MT16HTF12864A - 1GB DDR2 SDRAM Unbuffered DIMM (Micron)
MT16HTF12864HY - 1GB DDR2 SDRAM SODIMM (Micron)
MT16HTF25664A - 2GB DDR2 SDRAM Unbuffered DIMM (Micron)
MT16HTF25664HY - 2GB DDR2 SDRAM SODIMM (Micron)
MT16HTF6464A - 512MB DDR2 SDRAM Unbuffered DIMM (Micron)
MT16JTF1G64AZ - DDR3 SDRAM UDIMM (Micron)

Other Datasheets by Sumida Corporation

MT1610B - MODEM Transformer
MT1610C - MODEM Transformer
MT1812 - MODEM Transformer
MT1812B - MODEM Transformer

Full PDF Text Transcription

Click to expand full text

MODEM Transformer< Pin Type: MT Series> Type: MT1610A/MT1610B/MT1610C www.datasheet4u.com ◆ Product Description 16.6×16.6mm Max.(L×W),10.5mm Max. (MT1610C:11.7mm Max.)Height. Operating frequency: 4MHz Max. ◆ Feature International safety standard approved for reinforced isolation. Silicone Steel is used. Ideally used in set-top box,FAX,MODEM. V.92(56kbps) to V.32bis(14.4kbps). RoHS Compliance. ◆ Dimensions 16.6 MAX. 10.50 MAX. φ0.6 (mm) 16.6 MAX. 3 4 R CN 3.5+1.0 -0.5 2 7.6 1 12.7 sumida MIT-400L Silicone ◆ Land Pattern (mm) 4 3 ◆ Schematics(Bottom) 2 3 12.7 1 2 S 1 4 S “S” is winding start. 7.6 1.0X4 ◆ Specification Part Name MIT4033L MIT2050L MIT250L MIT400L MIT4211 MIT4212 Type MT1610A MT1610B MT1610B MT1610B MT1610C MT1610C Speed V.92 V.92 V.34 V.32bis V.92 V.

Published: May 30, 2009 |