SEN04G64D2BC2MT-30W Datasheet | Swissbit

Features : 200 Pin SO-DIMM SEN04G64D2BC2MT-xx[W]R 4GByte in FBGA Technology Ro HS pliant Options: Data Rate / Latency DDR2 667 MT/s CL5 DDR2 800 MT/s CL6 - Module Density 4GByte with 16 dies and 2 ranks Standard Grade Grade W (TA) (TC) (TA) (TC) 0°C to 70°C 0°C to 85°C -40°C to 85°C -40°C to 95°C Marking -30 -25 - - - - - - - - - 200-pin 64-bit Small Outline, Dual-In-Line Double Data Rate Synchronous DRAM Module Module organization: dual rank 512M x 64 VDD = 1.8V ±0.1V, VDDQ 1.8V ±0.1V 1.8V I/O ( SSTL_18 patible) Auto Refresh (CBR) and Self Refresh 8k Refresh every 64ms Serial Presence Detect with EEPROM Gold-contact pad This module is fully pin and functional patible to the JEDEC PC2-6400 spec. and JEDEC- Standard MO-224. (see .jedec.org) The pcb and all ponents are manufactured according to the Ro HS pliance specification [EU Directive 2002/95/EC Restriction of Hazardous Substances (Ro HS)] DDR2 - SDRAM ponent Micron MT47H256M8EB-25E:C 256Mx8 DDR2 SDRAM in FBGA-60 package Four bit prefetch architecture DLL to align DQ and DQS transitions with CK Eight internal device banks for concurrent operation Programmable CAS latency (CL) Posted CAS additive latency (AL) WRITE latency = READ latency - 1 t CK Programmable burst length: 4 or 8 Adjustable data-output drive strength On-die termination (ODT) - - - - - - - - - - - - - The refresh rate has to be doubled when 85°C>TC>95°C Environmental Requirements: - Operating temperature (ambient) Standard Grade 0°C to 70°C Grade W -40°C to 85°C - - Operating Humidity 10% to 90% relative humidity, noncondensing - Operating Pressure 105 to 69 k Pa (up to 10000 ft.) - Storage Temperature -55°C to 100°C - Storage Humidity 5% to 95% relative humidity, noncondensing - Storage Pressure 1682 PSI (up to 5000 ft.) at 50°C Figure: mechanical dimensions 1 if no tolerances specified ± 0.15mm Swissbit AG Industriestrasse 4 CH-9552 Bronschhofen Fon: +41 (0) 71 913 03 03 Fax: +41 (0) 71 913 03 15 .swissbit. e Mail: info@swissbit. Page 1...