1.5SMC27CA - 1500W Surface Mount Transient Voltage Suppressor
This page provides the datasheet information for the 1.5SMC27CA, a member of the 1.5SMC6.8A 1500W Surface Mount Transient Voltage Suppressor family.
Description
Value
PPPM IPPM
Peak Pulse Power Dissipation on 10/1000μs Waveform
Peak Pulse Current on 10/1000μs Waveform
Minimum 1500 See Table
IFSM Peak Forward Surge Current
TJ,TSTG
Operating Junction and Storage Temperature Range
200 -55 to 150
Unit
W A A °C
Conditions
Non-repetitive current pulse,
Features
Low inductance, excellent clamping capability.
Repetition rate(duty cycle): 0.05%.
Fast response time: typically less than 1.0ps from 0V to BV min.
Typical IR less than 1 µA above 10V
SMC.
High temperature soldering guaranteed 250°C/10 seconds at terminals.
This series is UL recognized under component index. File number E315008.
1.5SMC27CA - Transient Voltage Suppressor Diode(BOURNS)
1.5SMC27CA - GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(PAN JIT)
1.5SMC27CA - Surface Mount Transient Voltage Suppressors(JGD)
1.5SMC27CA - SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR(SunMate)
1.5SMC27CA - Surface Mount Transient Voltage Suppressors(GOOD-ARK)
1.5SMC27CA-AU - GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(PAN JIT)
1.5SMC27C - GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(PAN JIT)
1.5SMC27C - Surface Mount Transient Voltage Suppressors(JGD)
Other Datasheets by TAITRON
1.5SMC27A- 1500W Surface Mount Transient Voltage Suppressor
1.5SMC200A- 1500W Surface Mount Transient Voltage Suppressor
1.5SMC200CA- 1500W Surface Mount Transient Voltage Suppressor
1.5SMC20A- 1500W Surface Mount Transient Voltage Suppressor
1.5SMC20CA- 1500W Surface Mount Transient Voltage Suppressor
1.5SMC220A- 1500W Surface Mount Transient Voltage Suppressor
1.5SMC220CA- 1500W Surface Mount Transient Voltage Suppressor
1.5SMC22A- 1500W Surface Mount Transient Voltage Suppressor
Full PDF Text Transcription
Click to expand full text
1500W Surface Mount Transient Voltage Suppressor
1.5SMC6.8A - 1.5SMC250CA
1500W Surface Mount Transient Voltage Suppressor
Features
• Low inductance, excellent clamping capability
• Repetition rate(duty cycle): 0.05%
• Fast response time: typically less than 1.0ps from 0V to BV min. • Typical IR less than 1 µA above 10V
SMC
• High temperature soldering guaranteed 250°C/10 seconds at terminals
• This series is UL recognized under component index.